水泥板

Cement Board
产品线独立页面 / Product Line Detail Page

← 返回产品总览 / Back to all products

2.2 水泥板 / Cement Board (Fiber Cement Board)

产品定义 / Product Definition

以水泥为基础材料、矿物纤维和其他纤维为增强材料,经制浆、成型、养护而成的板材。纤维水泥板是传统砖墙和木材的理想替代品,具有卓越的防火、防潮和耐候性能,广泛应用于内外墙和天花板系统。

A building panel made from cement, mineral fibers and reinforcing fibers through pulping, forming and curing. Fiber cement board is an ideal alternative to traditional brick and wood, offering superior fire resistance, moisture resistance and weatherability for interior/exterior walls and ceilings.

参数 / Parameter规格 / Specification
系列 / Series纤维水泥挂板 / 三聚氰胺面 / UV转印装饰板 / 硅酸钙板 / 抛光纤维水泥板
厚度 / Thickness4 / 5 / 6 / 8 / 9 / 10 / 12 / 15 / 18 / 20 / 24 / 30 mm
标准尺寸 / Standard Size1220 × 2440 mm; 1220 × 1440 mm
密度 / Density1300–1700 kg/m³
防火等级 / Fire RatingA1级不燃 / Class A1 Non-Combustible
含水率 / Moisture Content≤10%
导热系数 / Thermal Conductivity≤0.20 W/(m·K)
抗折强度 / Flexural Strength横向 ≥11.0 MPa / 纵向 ≥8.5 MPa
环保与安全 / Environmental & Safety100%无石棉;VOC/甲醛释放如有客户要求,应以第三方检测报告为准。CARB P2 / F4 不作为纤维水泥板常规指标。
100% asbestos-free. VOC/formaldehyde emission data should be confirmed by third-party test reports when required. CARB P2/F4 are not standard specification items for fiber cement board.
石棉 / Asbestos100%无石棉 / 100% Asbestos-Free

核心卖点 / Key Selling Points:

应用场景 / Applications: 内外墙挂板、隔墙系统、天花板系统 / Exterior & interior cladding, partition systems, ceiling systems

阿里关键词 / Keywords: fiber cement board, cement board, calcium silicate board, fiber cement siding, exterior wall cladding, cement wall panel, non asbestos cement board

文件链接 / Files: 水泥板画册 | 水泥板画册(水印版)

纤维水泥板常见问题 / Fibre Cement Board FAQ

石材基层板要按完整构造判断 / Stone Backing Requires a Full Assembly Check

必须确认 / Must Confirm原因 / Why
石材尺寸、厚度和单位面积重量决定板材、龙骨/基层、固定件和粘结体系承受的荷载。
室内、室外及风雨暴露决定板材等级、接缝、防水层、固定件防腐和变形控制。
板厚与固定间距12 mm只是厚度,不等于任何石材系统都适用;跨度和固定方式必须一起核对。

包装算例:1220×2440×12 mm板按本页密度1300–1700 kg/m³估算,每张约46–61 kg;40张约1.86–2.43吨。因此“40张/托”与“每托不超过1吨”不能同时满足,若限重1吨,理论上约16–21张/托,还要加托盘重量。Packing example: A 1220×2440×12 mm board at 1300–1700 kg/m³ weighs roughly 46–61 kg. Forty sheets would be about 1.86–2.43 tonnes, so 40 sheets per pallet cannot also meet a one-tonne pallet limit.

纤维水泥板能否作为石材或瓷砖背衬?Can fibre cement board be used as a stone or tile backing board?

直接回答 / Direct answer: 可以作为候选基层,但不能仅凭“12 mm纤维水泥板”确认适用。需要把石材单位面积重量、板跨、龙骨/墙体、固定件间距、粘结剂、防水层、接缝和室外风荷载组成完整构造,由项目技术方确认。板材只承担系统中的一部分功能。

It may be a candidate substrate, but “12 mm fibre cement board” alone is insufficient. Stone weight, board span, framing/wall, fastener spacing, adhesive, waterproofing, joints and exterior wind load form one assembly for technical approval.

水泥板能否用于外墙或潮湿区域?Can cement board be used on façades or in wet areas?

直接回答 / Direct answer: 可用于潮湿或外墙的前提是具体型号和构造得到确认。外墙还要检查冻融/温变、吸水湿胀、抗风压固定、接缝、防水层和表面体系;“水泥做的”不等于任何水泥板都可裸露室外。

Wet-area or façade use requires an approved model and assembly. Façades add freeze-thaw/thermal movement, moisture movement, wind fixing, joints, waterproofing and finish; cement content alone does not make every board exterior-exposure grade.

怎样确认尺寸、厚度和数量?How do we confirm size, thickness and quantity?

直接回答 / Direct answer: 本页常规尺寸1220×2440或1220×1440 mm,厚4–30 mm。数量按净覆盖面积÷单张面积加损耗计算;若是1220×2440 mm,单张约2.9768㎡。80张毛面积约238.1㎡,还未扣切割和损耗。

Standard sizes shown are 1220×2440 or 1220×1440 mm in 4–30 mm thickness. A 1220×2440 mm sheet covers about 2.9768 m², so 80 sheets provide about 238.1 m² gross before cutting and waste.

可以提供哪些技术文件?Which technical documents are available?

直接回答 / Direct answer: 资料应按问题配套:尺寸密度看技术数据表,防火看对应标准测试,外墙看耐候/冻融/风压相关证据,石材基层看完整系统节点。先写明客户要验证的性能,再提供对应文件,避免一次发很多无关证书。

Match documents to the question: technical data for size/density, test reports for fire, relevant weather/freeze-thaw/wind evidence for façades, and assembly details for stone backing. Identify the required property before sending files.

询价必填 / Required for quotation: 用途、长×宽×厚、结构或材质、表面/颜色、数量、目标国家、标准或文件要求、贸易条款与目的港。

Required: application, length × width × thickness, construction/material, surface/color, quantity, destination, standard/document needs, Incoterm and port.

检测依据 / Test basis: 如客户需要确认该性能,请以对应第三方检测报告为准。建议核对:测试标准、测试结果、适用条件、报告编号/文件链接。 When a customer needs to confirm this performance, use the relevant third-party test report. Check test standard, test result, applicable condition and report number/file link.

↑