产品定义 / Product Definition
将天然木材或科技木经旋切/刨切/锯切制成极薄的木皮（0.15-0.6mm），贴覆在人造板表面赋予天然木纹和实木质感。天然木皮保留木材天然纹理和色泽，科技木皮通过染色和重组模拟稀有木种。可提供背胶（无纺布/纸背）或未背胶版本。
Ultrathin slices (0.15-0.6mm) of natural or engineered wood produced by rotary cutting/slicing/sawing, applied to engineered panels to provide natural wood grain and solid wood feel. Natural veneer preserves original wood texture; engineered veneer simulates rare wood species through dyeing and reconstitution. Available with fleece/paper backing or unbacked.
| 参数 / Parameter | 规格 / Specification |
|---|---|
| 木种 / Species | 奥古曼/桦木/柚木/胡桃木/斑马木/花梨木等 / Okoume, Birch, Teak, Walnut, Zebrano, Rosewood etc. |
| 厚度 / Thickness | 0.15–0.6 mm |
| 标准尺寸 / Standard Size | 根据原木定制 / Custom per log |
| 背衬 / Backing | 无背/纸背/无纺布背 / Unbacked, paper-backed, fleece-backed |
核心卖点 / Key Selling Points: 天然木纹真实质感 / 高效利用稀有木种 / 科技木颜色尺寸稳定 / 背胶即贴施工便捷
应用场景 / Applications: 家具贴面/室内装修/门/墙板/地板面板 / Furniture facing, interior decoration, doors, wall panels, flooring
阿里关键词 / Keywords: wood veneer, natural wood veneer, engineered veneer, okoume veneer, teak veneer, paper backed veneer, wood veneer sheet, decorative veneer
文件链接 / Files: Wood Veneer Catalog
| 类型 / Type | 判断与用途 / Decision |
|---|---|
| 天然木皮 | 纹理和色差自然，适合强调真实木感；需用代表样＋允许范围样管理批次差异。 |
| 科技木皮 | 由木材重组形成更稳定、可重复的纹理和颜色，但仍应按实际样板验收。 |
| 印刷/三聚氰胺木纹 | 图案重复更规则、批量一致性通常更容易控制；它不是实木皮，报价和描述不能混用。 |
完整规格写法：“0.2 mm未涂饰胡桃木天然木皮，贴15 mm刨花板，背面平衡层，1220×2440 mm”比只写“walnut board”清楚得多，也能避免把已涂装木皮或印刷木纹报错。Complete specification: “0.2 mm unfinished natural walnut veneer on 15 mm particle board, balancing back, 1220×2440 mm” is far clearer than “walnut board” and prevents substitution with prefinished or printed grain.
直接回答 / Direct answer: 看四点：板边是否有真实薄木层、纹理是否规律重复、表面是否有天然导管/触感、规格是否写明树种和木皮厚度。天然木皮有合理色差；科技木纹理较可控；印刷木纹重复最规律。最终应以材料结构和实样判定，不靠正面照片。
Check the edge for a real wood layer, pattern repetition, natural pores/feel, and whether species and veneer thickness are specified. Natural veneer varies, engineered veneer is more controlled, and printed grain repeats most regularly. Use construction and samples, not only a face photo.
直接回答 / Direct answer: 报价必须从四种交付形态中选一项：原木皮、纸/无纺布背衬木皮、预涂木皮、或已经贴在MDF/刨花板/胶合板上的饰面板。客户要自行染色时，应明确“未涂饰”，否则预涂层会影响后续着色。
The quotation must identify raw veneer, paper/fleece-backed veneer, prefinished veneer, or a veneered MDF/particleboard/plywood panel. If the customer will stain it, specify “unfinished,” because a factory coating changes later finishing.
直接回答 / Direct answer: 天然木皮不能只批准一小块“标准色”。应确认树种、切法和涂装后，批准一块代表样及深浅允许范围；拼花时再规定顺纹、对花或随机拼。科技木和印刷纹理的一致性更高，但也要按批次确认。
Natural veneer should not be approved from one tiny standard-color sample. Approve species, cut and finish, then a representative plus light/dark range; define slip match, book match or random match. Engineered and printed grain still require batch approval.
直接回答 / Direct answer: MDF表面平整，适合精细木饰面；胶合板握钉和结构性更好；刨花板经济但边部和含水控制更重要。无论选哪种，正面贴木皮后通常要做背面平衡层，并控制基材含水率和压贴工艺。
MDF is flat for fine veneer work, plywood offers stronger screw holding and structure, and particle board is economical but needs more edge/moisture control. Any substrate normally needs a balancing back plus controlled moisture and pressing.
询价必填 / Required for quotation: 用途、长×宽×厚、结构或材质、表面/颜色、数量、目标国家、标准或文件要求、贸易条款与目的港。
Required: application, length × width × thickness, construction/material, surface/color, quantity, destination, standard/document needs, Incoterm and port.