SPC 石晶墙板 · 产品档案 / SPC Wall Panel Product Guide
本页以 SPC 石晶墙板（Stone Plastic Composite，石塑复合墙板）为主干，说明材料、五层结构、八道工序、1220×2440 与 610×2440 的厚度配置、UV 墙板 2.0/2.5/2.8/3.0 mm 的普通膜与鎏金膜组合、选型、应用、质检、包装装运和询盘要点。同时保留 WPC / 竹木碳晶墙板与槽板系统的常见问题，先把品类分清再报价。表中尺寸、密度与装运数字是产品资料中的参考，具体供货范围、库存、报告和交期以当前型号确认。
This page is built around SPC stone-plastic composite wall panel: material, five-layer construction, eight production stages, thickness options for 1220×2440 and 610×2440, and the UV wall panel range at 2.0/2.5/2.8/3.0 mm with standard or gilded film, plus selection, applications, QC, packing/loading and inquiry inputs. WPC / bamboo-charcoal panels and slatwall FAQ are retained so the product categories are separated before quotation. Dimensions, density and loading figures are reference data from the product file; confirm current availability, stock, reports and lead time for the actual model.
01 · SPC 石晶墙板的材料与产品定位 / Material & Positioning
SPC 墙板的核心层与 SPC 地板同源：以天然石灰石粉（碳酸钙）为主体骨架，PVC 树脂为粘结介质，配合稳定剂，经高温高压挤出成型的刚性板材，行业里常称“刚性芯”（Rigid Core），不是传统软性塑料板。表面压贴高清装饰膜（木纹 / 石纹 / 纯色 / 布纹），观感接近石材与木饰面，但重量轻、通常不需要干挂。
The SPC wall-panel core shares its lineage with SPC flooring: calcium-carbonate stone powder forms the skeleton, PVC resin acts as the binder and stabilizers complete the system, all extruded into a rigid board often called a rigid core. It is not a soft plastic panel. High-definition decor film (wood, stone, solid colour or fabric) is laminated to the face, giving a stone or wood look at lower weight and usually without dry-hanging.
资料范围内，SPC 石晶墙板常见板厚约 3.0–5.8 mm，宽度 1220 mm 或分切开槽后的 610 mm，长度以 2440 mm 为常规并可定制加长；UV 墙板是另一条较薄的表面 UV 工艺路线，常见 2.0–3.0 mm。芯层密度资料给出约 2000 kg/m³，属于刚性石塑板而非发泡板。
In the documented range, SPC wall panels run roughly 3.0–5.8 mm thick at 1220 mm wide, or 610 mm after splitting/grooving, with 2440 mm as the standard length and custom longer lengths available. The UV wall panel is a separate, thinner UV-cured surface route at about 2.0–3.0 mm. The source gives a core density of about 2000 kg/m³, indicating a rigid stone-plastic board rather than a foamed panel.
| 参数 / Parameter | 规格 / Specification |
|---|---|
| 组成 / Composition | 石灰石粉（碳酸钙）+ PVC 树脂 + 稳定剂，挤出刚性芯板，表面复合装饰膜Calcium-carbonate stone powder + PVC resin + stabilizers, extruded rigid core with laminated decor film. |
| 常规厚度 / Standard thickness | 3.0 / 3.8 / 4.8 / 5.8 mm（SPC 石晶墙板）3.0 / 3.8 / 4.8 / 5.8 mm for SPC wall panel. |
| 常规板幅 / Standard size | 1220 × 2440 mm，长度可定制1220 × 2440 mm; length can be customized. |
| 开槽款 / Grooved | 610 × 2440 mm，宽度减半，适合竖条拼接 / 背景墙造型610 × 2440 mm, half width, for vertical strip layouts and feature walls. |
| UV 墙板 / UV panel | 1220 × 2440 mm；2.0 / 2.5 / 2.8 / 3.0 mm；普通膜或鎏金膜，UV 高光可选2.0 / 2.5 / 2.8 / 3.0 mm; standard or gilded film, optional UV gloss. |
| 芯层密度 / Core density | 资料参考约 2000 kg/m³About 2000 kg/m³ reference. |
| 表面 / Surface | 木纹 / 石纹 / 纯色 / 布纹；普通膜 / 鎏金膜 / UV 高光Wood, stone, solid colour or fabric; standard film, gilded film or UV gloss. |
| 防火 / Fire | 资料标注阻燃，等级须按所选型号、结构与对应检测报告确认，不把单一报告扩展到全部系列The source describes flame retardancy; the class must match the model, construction and applicable report. |
| 耐水 / Water | 芯材耐水；接缝、基层防水与收边决定完整墙面系统的湿区适用性Water-resistant core; joints, substrate waterproofing and edge details govern wet-area suitability. |
品类边界：不要与相近墙板混报 / Category Boundaries
墙板类目下常被混为一谈的几类产品，基材、重量、切割、固定与收边逻辑不同，不能只凭花色相似就互换型号或价格。
Several wall products are often confused. Their substrate, weight, cutting, fixing and edge logic differ, so a similar decor does not make them interchangeable in model or price.
| 品类 / Category | 基材与结构 / Construction | 常见规格 / Typical size | 连接与收边 / Joints & edges | 主要边界 / Key boundary |
|---|---|---|---|---|
| SPC 石晶墙板 | 碳酸钙石粉 + PVC 刚性芯 + 装饰膜（可加 UV 涂层） | 3.0–5.8 mm；1220×2440、610×2440 开槽；UV 款 2.0–3.0 mm | 结构胶 / 卡件上墙，开槽拼接 | 芯材耐水不等于墙体防水；报告与厚度按型号 |
| WPC 木塑墙板 / WPC | 木粉与塑料复合，按型号核实配方 | 06 合集：大板 1220×2800×8 mm；格栅 153×3000×19 mm | 配套卡扣或型材；按系统确认 | 不是 SPC 石晶芯；室内外配方不同，不能套用 SPC 参数 |
| PVC / UV 仿大理石片材 | 塑料或复合片材表面体系 | 常见薄板，按系列 | 胶粘或配套型材 | 重量、切割、封边与木基板不同 |
| 木基饰面板 | 木质基材 + 装饰面 | 按基材与饰面 | 机械固定、封边 | 板边封闭、受潮与螺钉固定要求不同 |
使用边界：“防水”“防火”“免漆快装”都要落到具体型号、基层、接缝、收边和检测报告。耐潮基材不代表可以忽略墙体渗水、阴阳角密封和高温日晒；涉及燃烧、VOC 或长期浸水时，应按最终型号和完整墙体做文件核验。Use boundary: waterproof, fire and no-paint claims must be tied to the model, substrate, joints, trims and report. A moisture-tolerant core does not remove the need to control wall leakage, corner sealing or heat/sun exposure; fire, VOC and permanent-immersion use need model-specific evidence.
02 · 五层结构与厚度口径 / Five-layer Reference & Thickness
按产品资料，标准 SPC 墙板从下到上为五层；UV 墙板在此基础上于表面增加 UV 光固化涂层。层示意图用于理解构造顺序，实际剖面、平衡层与涂层是否存在应按选定型号的物料表或断面样核对。
The product file describes five layers from bottom to top; the UV wall panel adds a UV-cured coating on the face. The illustration explains the build order; confirm the actual section, balancing layer and coating against the selected model's bill of materials or cut sample.
- ① 背板 / 平衡底 / Backing：平整贴合基层，使板背受力均匀，可直接用结构胶上墙。Levels the back, distributes stress and allows direct structural-adhesive fixing to the wall.
- ② 平衡层 / Balancing layer：稳定应力，降低起拱与翘曲风险；是否独立设置按型号。Balances stress to reduce bowing and warping; whether it is a separate layer is model-dependent.
- ③ SPC 刚性芯层 / Rigid core：石粉与 PVC 复合的主体厚度层，决定板体刚度、耐水、阻燃与尺寸稳定，也是开槽加工的受力层。The main mineral-PVC body: governs rigidity, water resistance, flame retardancy and stability, and carries the machined groove.
- ④ 装饰膜 / Decorative film：高清木纹、石纹、纯色或布纹印刷膜。普通膜适合走量；鎏金膜带金属光泽，适合轻奢工装。Printed wood/stone/solid/fabric decor. Standard film suits volume work; gilded film gives a metallic look for premium fit-outs.
- ⑤ UV 涂层 / 保护层 / UV coating：UV 墙板工艺的表面光固化层，用于防刮、防污与耐黄变；普通 SPC 墙板是否带此层按型号。UV-cured top layer on UV panels for scratch, stain and yellowing resistance; whether a standard panel has it is model-specific.
| 层 / Layer | 材料 / Material | 功能与确认点 / Function & check |
|---|---|---|
| 表面 / Surface | UV 涂层 / 装饰膜 | 普通膜走量；鎏金膜金属光泽、适合轻奢工装；UV 高光提升镜面质感。按型号确认膜种与光泽Confirm film type and gloss by model. |
| SPC 芯 / Core | 石灰石粉 + PVC | 资料密度约 2000 kg/m³；耐水、阻燃与尺寸稳定须对应型号配方和报告About 2000 kg/m³; water, fire and stability claims need the matching formulation and report. |
| 加工 / Processing | 雕刻 / 开槽 | 可选雕刻工艺；开槽款 610 mm 宽，可做平槽或 U 型槽，用于装饰线条 / 造型缝Optional engraving; the 610 mm grooved version can take flat or U grooves as decorative lines. |
厚度写法：SPC 石晶墙板资料列出 3.0 / 3.8 / 4.8 / 5.8 mm 四档板厚；UV 墙板为 2.0 / 2.5 / 2.8 / 3.0 mm。这里的厚度指板体总厚，不含包装；若客户按“基材＋表面”拆分报价，应要求报价方说明每一档的口径，避免把总厚与某一层厚混用。
Thickness notation: the SPC panel file lists 3.0 / 3.8 / 4.8 / 5.8 mm, and the UV panel 2.0 / 2.5 / 2.8 / 3.0 mm. These are overall board thickness excluding packing. If a quotation splits “base + surface”, ask the supplier to state each convention so an overall thickness is not confused with a single layer.
03 · 八道生产工艺 / Eight Production Stages
按资料中的八个环节展开。部分设备会把压贴、定型等步骤联机完成，实际工序顺序与参数以生产线确认为准；每个环节都给出可检查的控制点。
Eight documented operations are described below. Lamination and sizing may be integrated on some lines; confirm the actual sequence and parameters. Each stage lists a checkable control point.
- 原料干混 / Dry blending：石粉、PVC 与稳定剂高速搅拌。检查原料批次、配料记录与混合均匀度。High-speed mixing of stone powder, PVC and stabilizers; check batch traceability, formulation records and uniformity.
- 挤出成型 / Extrusion：高温塑化并挤出 SPC 刚性板坯。检查芯板密实度、边部韧性与断面均匀。Heat and extrude the rigid board; check consolidation, edge toughness and section uniformity.
- 冷却定型 / Cooling & sizing：水冷定型并控制厚度公差。检查厚度波动、平整度与板面冷却均匀。Water-cool and size the board; check thickness variation, flatness and even cooling.
- 压贴复合 / Lamination：辊压贴合装饰膜与平衡层。检查气泡、脱层、膜面褶皱和纹理方向。Roll-laminate decor film and balancing layer; check bubbles, delamination, wrinkles and grain direction.
- UV 固化 / UV curing：UV 工艺在表面涂覆并固化涂层。检查光泽一致、涂布均匀与固化效果。For UV panels, apply and cure the surface coat; check gloss consistency, coverage and cure quality.
- 雕刻 / 开槽 / Engraving & grooving：按款型做雕刻线条或分切开槽。检查槽型（平槽 / U 型槽）、槽宽槽深与边缘崩缺。Machine engraved lines or split grooves by model; check profile (flat/U), width/depth and edge chipping.
- 裁边质检 / Trimming & inspection：裁切到尺寸并检验平整度、色差与外观。记录尺寸、抽样量与判定条件。Trim to size and inspect flatness, shade and appearance; record dimensions, sample size and acceptance conditions.
- 包装出货 / Packing：打包、装托。检查箱标、数量、护角与托盘稳固；木托及包装费用口径随报价确认。Pack and palletize; check labels, quantity, corner protection and pallet stability. Pallet/packing cost terms follow the quotation.
品质要点：资料指出石粉填充比例越高，板体越硬挺、尺寸越稳定；芯层密度参考约 2000 kg/m³，厚薄公差直接影响拼接平整度，雕刻与开槽精度决定安装缝隙是否均匀。这些是工艺关注点，不等于每个批次都已达标的承诺，应以抽样实测和对应报告为准。Quality note: the source states that a higher stone-powder ratio gives a stiffer, more stable board, with core density around 2000 kg/m³. Thickness tolerance affects joint flatness and machining accuracy affects seam evenness. These are focus points, not a batch-level guarantee; verify by sampling and reports.
04 · 规格与配置矩阵 / Specification & Configuration Matrix
以下保留产品资料中的板幅与厚度配置关系，单位 mm。表中不含金额，价格、税费、运费、木托与雕刻 / UV 等加工费一律以正式报价单口径为准；这些配置不构成现货、认证或全部组合均可供货的承诺。
The tables below retain the board-size and thickness configurations from the product file, in mm. Amounts are deliberately excluded: price, tax, freight, pallets and optional engraving/UV charges follow the formal quotation. These configurations do not guarantee stock, certification or availability of every combination.
手机上可左右滑动宽表格查看全部列。 / Swipe wide tables horizontally on mobile.
① SPC 石晶墙板 · 常规款 1220×2440 / Standard 1220×2440
| 板幅 / Size (mm) | 板厚 / Thickness (mm) | 可选雕刻 / Optional engraving |
|---|---|---|
| 1220 × 2440 | 3.0 | 可选，费用按报价单 / Optional, per quotation |
| 3.8 | ||
| 4.8 | ||
| 5.8 |
② SPC 石晶墙板 · 分切开槽款 610×2440 / Grooved 610×2440
开槽款宽度减半，适合竖条拼接与背景墙造型；可开平槽或 U 型槽作为板与板之间的装饰线条 / 造型缝。
The grooved version is half width for vertical strips and feature walls; flat or U grooves form decorative lines between panels.
| 板幅 / Size (mm) | 板厚 / Thickness (mm) | 可选雕刻 / Optional engraving |
|---|---|---|
| 610 × 2440 | 3.0 | 可选，费用按报价单 / Optional, per quotation |
| 3.8 | ||
| 4.8 | ||
| 5.8 |
开槽运输提醒：开槽后板边变薄，搬运过程中可能出现槽口损坏，务必做好打包防护并在下单前向客户说明。槽型、槽宽、槽深与拼接方向要写进图纸，否则“平槽 / U 槽”“8 槽 30 cm”这类描述仍可能做反。Grooving and transport: grooving thins the board edge, so damage in handling is possible — protect the packing and inform the customer before ordering. Put profile, width, depth and orientation on a drawing, otherwise a “flat/U groove” specification can still be made the wrong way round.
③ UV 墙板 1220×2440（2.0 / 2.5 / 2.8 / 3.0 mm） / UV wall panel
UV 墙板是较薄的表面 UV 工艺路线。表面可选普通膜或鎏金膜，UV 高光为可选工艺；长度常规 2440 mm，可定制加长，下单前与工厂确认。
The UV panel is a thinner UV-cured surface route. The face may be standard or gilded film, with optional UV gloss. Length is normally 2440 mm and can be customized; confirm with the factory before ordering.
| 板厚 / Thickness (mm) | 普通膜 / Standard film | 鎏金膜 / Gilded film | UV 高光 / UV gloss |
|---|---|---|---|
| 2.0 | 可选 / Available | 可选 / Available | 可选工艺，费用按报价单 / Optional, per quotation |
| 2.5 | |||
| 2.8 | |||
| 3.0 |
起订与价格口径：UV 墙板资料给出每种颜色 100 张起订；低于起订量的加价、特殊颜色、含税口径、运费和出口木托包装费用均需另行确认，以最新报价单为准。SPC 石晶墙板与 UV 墙板的税费、包装和加工费口径应分开写，避免两款产品混报。
MOQ and price basis: the UV panel file states a 100-sheet minimum per colour. Below-MOQ surcharges, special colours, tax basis, freight and export pallet/packing charges must be confirmed separately on the current quotation. Keep the SPC panel and UV panel tax, packing and processing terms separate so the two products are not quoted as one.
05 · 选型：常规款、开槽款与 UV 墙板 / Selection: Standard, Grooved & UV
三条路线不是简单的高低配，而是按墙面尺寸、造型、性能和施工条件选择。先确定板幅与厚度，再确定膜种与表面光泽，最后确定开槽和收边节点。
The three routes are not a simple grade ladder; choose by wall size, design, performance and site conditions. Fix size and thickness first, then film and gloss, then groove and edge details.
| 路线 / Route | 典型板幅 / Size | 厚度 / Thickness | 表面 / Surface | 更适合 / Better for | 注意 / Watch |
|---|---|---|---|---|---|
| SPC 石晶墙板·常规款 | 1220 × 2440 | 3.0 / 3.8 / 4.8 / 5.8 | 木纹 / 石纹 / 纯色 / 布纹 | 大面积墙面，接缝少、施工快Large areas with fewer seams. | 大板搬运与阴阳角收边Handling and corner trims. |
| SPC 石晶墙板·开槽款 | 610 × 2440 | 3.0 / 3.8 / 4.8 / 5.8 | 同上，可开平槽 / U 型槽 | 竖条拼接、背景墙造型、装饰缝Vertical strips, feature walls, decorative lines. | 槽口运输损坏；槽型方向Groove damage in transit; orientation. |
| UV 墙板 | 1220 × 2440 | 2.0 / 2.5 / 2.8 / 3.0 | 普通膜 / 鎏金膜，UV 高光可选 | 较轻薄的饰面、追求镜面或金属质感Thinner facings; gloss or metallic look. | 每色 100 张起订；光泽清洁维护100-sheet MOQ per colour; gloss care. |
膜种怎么选：普通膜用于走量花色；鎏金膜带金属光泽，辨识度高，适合轻奢工装与酒店项目；UV 高光提升镜面质感，但对基层平整度和表面清洁更敏感。选膜时应看大板样和现场灯光，屏幕颜色与实物可能存在差异。
Film choice: standard film for volume decors; gilded film for a metallic, high-recognition look in premium fit-outs and hotels; UV gloss for a mirror-like finish, which is more sensitive to substrate flatness and surface cleaning. Screen decors against a large sample under project lighting.
雕刻与开槽：需要线条造型时选雕刻或开槽款；开槽款本身按开槽板幅供货。雕刻、开槽属于可选加工，工艺难度、槽型和数量会影响交期与报价，须在下单前确认。
Engraving and grooving: choose engraved or grooved panels when a line pattern is required; the grooved version is supplied at the reduced board width. Engraving/grooving are optional processes whose profile and quantity affect lead time and quotation, so confirm them before ordering.
06 · 应用场景与系统条件 / Applications & System Conditions
资料列出酒店 / 公寓、住宅背景墙、卫浴厨房湿区、商业空间和旧房改造五类场景。下表保留这些场景，同时把每个场景从“卖点”改写为“选型条件 + 风险控制”，避免把板材特性直接当成工程结论。
The source lists hotels/apartments, residential feature walls, bathroom/kitchen wet areas, commercial spaces and renovation. The table keeps these scenes but restates each as selection conditions plus risk control, rather than treating a board property as a project conclusion.
| 场景 / Use | 选型条件 / Selection | 风险控制 / Control |
|---|---|---|
| 酒店 / 公寓 / Hotels & apartments | 客房背景墙、走廊、卫生间湿区；可做地面 + 墙面同色方案Guest-room feature walls, corridors, wet areas; coordinated floor/wall scheme. | 核对膜种耐磨与清洁、接缝密封、商业使用条件；不承诺具体品牌连锁已采用Check film wear/cleaning, joint sealing and commercial terms; do not claim specific hotel brands. |
| 住宅背景墙 / Residential feature walls | 客厅电视墙、卧室床头墙；石纹 / 木纹 / 纯色TV or bedhead walls in stone, wood or solid colour. | 现场灯光下确认大板色样、光泽与纹理重复Approve large sample for shade, gloss and repeat. |
| 卫浴 / 厨房湿区 / Wet areas | 可在平整、牢固、洁净的旧瓷砖上以结构胶上墙，减少敲砖工序Structural adhesive onto flat, sound, clean existing tiles to reduce demolition. | 基层禁空鼓油污；接缝、收边与基层防水仍需按系统施工，长期浸水或室外须另核方案No hollow/greasy substrate; joints, trims and substrate waterproofing still required. Permanent immersion or exterior needs separate verification. |
| 商业空间 / Commercial | 餐厅、办公室、会所、展厅的大面积墙面Restaurants, offices, clubs, showrooms. | 按项目确认防火、接缝与基层要求；防火等级以对应报告为准Confirm fire, joint and substrate requirements; fire class per report. |
| 旧房改造 / Renovation | 老墙免铲除直接覆盖时可缩短工期Cover existing walls without full removal to shorten works. | 先评估原墙平整、强度与含水率；不平整或松散基层需先处理Assess flatness, strength and moisture first; treat loose or uneven substrates. |
出口合规：资料的市场部分提到出口项目常见 CE、EN 13501 防火与 RoHS 等要求，属于行业背景信息，未绑定本页型号的报告编号。客户问到认证时，应说明按具体型号提供现有文件，并核对测试标准、结果、适用条件与报告编号，不把行业常见要求当作已获证书。Export compliance: the source's market section mentions CE, EN 13501 and RoHS as common export requirements. This is background information without a report ID tied to these models. State which documents exist for the actual model and check standard, result, conditions and report number; do not present common requirements as certificates already held.
07 · 花色体系与图册 / Decor Systems & Catalogues
资料包含总览参考页及两套独立编号的花色体系，不能互相套用编号：
The file contains overview sheets and two separately coded decor systems; their codes are not interchangeable:
- 高定 SPC 石晶板（参考图 8 张组合页）：如阿玛尼灰、星际天空、亚麻布艺、米砂岩、灰砂岩、鱼肚白、灰理石、罗马洞石、莫斯灰、水磨石等，用于佛山工厂的配色筛选。组合页为参考图，询价时请附图确认。Premium SPC decor reference sheets (Armani grey, starry sky, linen, sandstone, fish-belly white, grey marble, Roman travertine, moss grey, terrazzo, etc.) for Foshan colour screening; confirm with the image in an inquiry.
- 山东 SX 高定系列 A001–A018（18 款）：取自 SX 高定 SPC 石晶板图册，每张为“左侧花色样板 + 右侧应用实景”。Shandong SX premium series A001–A018 (18 decors) from the SX catalogue, each sheet showing the swatch and an application view.
- 石纹效果系列 HC / HY（83 张资料图，含 1 张系列总览）：取自石纹效果图册，编号如 HC995、HC8853、HY09138222 等，按图册原样保留型号；不将总览图计为单独花色。HC/HY library: 83 images including one series overview, not 83 individual decors. Model labels follow the source catalogue.
山东 SX 高定系列 A001–A018 / SX Premium Series
正在载入 / Loading…
石纹效果系列 HC / HY（83 张资料图）/ Stone-effect HC/HY Library
正在载入 / Loading…
点击缩略图查看完整 WebP；屏幕颜色、纹理比例与实物可能不同。屏幕筛选后，再用大板样核对光泽、重复纹理和批次范围。两套体系与公司高定 SPC 石晶板是不同花色来源，下单前请与采购确认花色与数量。
Click a thumbnail for the full WebP. Screen colour and texture scale can differ from the physical product. Screen first, then approve a large sample for gloss, repeats and batch range. The two systems are separate sources from the premium SPC range; confirm decor and quantity with purchasing before ordering.
MT 鎏金系列图册 / MT Gilded catalogue · SX 高定 SPC 石晶板图册 / SX premium SPC catalogue · 石纹效果（2025版）图册 / Stone-pattern 2025 catalogue · 全部图册 / All catalogues
八张多花色总览 / Eight multi-decor overview sheets
08 · 质量控制与文件核验 / QC & Evidence
| 检查项 / Item | 验收操作 / Method | 需记录 / Record |
|---|---|---|
| 厚度与尺寸 / Dimensions | 多点测板体厚度、长宽、直角与平整度Measure thickness, length/width, squareness and flatness at several points. | 测量方法、抽样量、允差口径、实测值Method, sample size, tolerance basis and results. |
| 芯层与断面 / Core | 观察断面密实度、边部韧性与杂质；核对密度声明Inspect section density, edge toughness and inclusions; verify density declaration. | 型号、批次、密度与原料声明Model, batch, density and material declaration. |
| 表面与膜层 / Surface | 检查气泡、脱层、压纹对位、光泽、色差与纹理重复Check bubbles, delamination, emboss alignment, gloss, shade and repeats. | 批准样、批号与可接受范围Approved sample, batch and allowable range. |
| 雕刻 / 开槽 / Machining | 检查槽型（平槽 / U 型槽）、槽宽槽深、线条一致与崩边Check groove profile, width/depth, line consistency and chipping. | 加工图、首件与抽检结果Machining drawing, first article and sampling results. |
| 拼装模拟 / Trial fit | 不同箱取样试拼，检查拼缝、高低差与方向Trial-fit samples across cartons for gaps, lipping and orientation. | 试拼照片与判定条件Photos and acceptance conditions. |
| 功能表现 / Performance | 按用途核对防火、耐水、尺寸稳定、VOC / 甲醛等资料Review fire, water, stability and VOC/formaldehyde evidence for the intended use. | 标准、样品型号、结果、条件、报告编号Standard, sample model, result, conditions and report ID. |
资料给出芯层密度约 2000 kg/m³ 与“可泡水”的定位，但未逐型号附测试报告；“防水防潮”“阻燃”等表述应落到具体型号和对应报告。不给未提供报告的产品自动添加证书或环保标识，也不把行业常见等级当作已达标证据。The source states a core density around 2000 kg/m³ and a water-resistant positioning, but does not attach a per-model test report. Water and flame claims must match the model and evidence; do not add certificate or eco badges to products without reports, nor treat common industry grades as proven.
06 合集配套型材 / Accessories from the 06 combined archive
收边铝型材、拼接铝型材、阳角铝型材和阴影阳角均记录为 2.8 m/支；踢脚线为 30 mm×2.8 m。分别用于边缘、板缝、外角与装饰角、地板收脚。截面、颜色、固定方法与板厚兼容性需随订单核实；不沿用合集中的费用。Edge, joint, external-corner and shadow-corner aluminium trims: 2.8 m per length; skirting: 30 mm × 2.8 m. Confirm profile, colour, fixing and board-thickness compatibility per order.
09 · 包装、装运与核算 / Packing, Loading & Planning
包装应列明板幅、厚度、张数、箱标、护角和托盘方式。开槽板要额外保护槽口；UV 墙板镜面或金属光泽面应避免摩擦划伤。木托、木箱与出口包装费用按报价口径另行确认。
Packing should state size, thickness, sheet count, label, corner protection and pallet type. Grooved panels need extra edge protection, and UV gloss/metallic faces should avoid rubbing damage. Pallet, crate and export packing charges follow the quotation terms.
资料按“密度 2000 kg/m³、40 尺柜限重 28 吨、托盘高约 13 cm、每托统一按约 1.8 吨核算（3.0 mm 为 100 张/托）”给出 UV 墙板装柜参考。单张重量可按“面积 × 厚度 × 密度”估算。
The source gives a UV-panel loading reference based on 2000 kg/m³ density, a 28-tonne 40 ft container limit, pallets about 13 cm high and roughly 1.8 tonnes per pallet (100 sheets at 3.0 mm). Single-sheet weight can be estimated as area × thickness × density.
| 板厚 / Thickness (mm) | 单张重参考 / Sheet weight (kg) | 每托张数 ≤1.8 t / Sheets per pallet | 40 尺柜托数参考 / Pallets (28 t) | 装柜张数参考 / Sheets | 装柜体积参考 / Volume (m³) |
|---|---|---|---|---|---|
| 2.0 | 约 11.9 | 151 | 约 16 | 2,416 | 约 21.5 |
| 2.5 | 约 14.9 | 120 | 约 16 | 1,920 | 约 21.4 |
| 2.8 | 约 16.7 | 108 | 约 16 | 1,728 | 约 21.5 |
| 3.0 | 约 17.9 | 100 | 约 16 | 1,600 | 约 21.4 |
算例：1220×2440 mm 单张名义面积 2.9768 m²；按每托 1.8 吨、3.0 mm 板单张约 17.9 kg 计，100 张约 1.79 吨，与资料一致。610×2440 mm 单张名义面积约 1.4884 m²，同厚度单张重量约为 1220 mm 宽板的一半。
Example: a 1220×2440 mm sheet is 2.9768 m² nominal. At about 17.9 kg for a 3.0 mm sheet, 100 sheets are about 1.79 t, matching the source. A 610×2440 mm sheet is about 1.4884 m², roughly half the weight at the same thickness.
装运边界：上述托数与装柜张数是资料参考值，未逐一核对实际柜型、船公司限重、路线、托盘尺寸与包装增重。正式出运应按每款箱数、净 / 毛重、托盘尺寸与高度、总重重新核算，并写明目的港与贸易条款。Loading boundary: the pallet and sheet figures are reference values and were not checked against the actual container type, carrier weight limits, route, pallet size and packing weight. Recalculate cartons, net/gross weight, pallet dimensions/height and total weight per shipment, and state the destination port and Incoterm.
10 · 一次问清的询盘清单 / Complete Inquiry Checklist
| 字段 / Field | 要写清的内容 / Required detail |
|---|---|
| 项目与环境 / Project | 国家、室内 / 外墙、面积、湿区、日晒、基层材质与平整情况Country, interior/exterior, area, wet areas, sun exposure, substrate and flatness. |
| 产品路线 / Route | SPC 石晶墙板常规款 / 开槽款 / UV 墙板，或需一并比较 WPC / 槽板系统SPC standard / grooved / UV, or compare WPC/slatwall. |
| 规格 / Specification | 长 × 宽、板厚、板幅（1220 / 610）、是否需要加长Length × width, thickness, board width (1220/610), custom length. |
| 表面与花色 / Surface & decor | 木纹 / 石纹 / 纯色 / 布纹，普通膜 / 鎏金膜 / UV 高光，花色编号或附图，大板样确认Wood/stone/solid/fabric, standard/gilded/UV gloss, decor code or image, large-sample approval. |
| 加工 / Processing | 是否雕刻、是否开槽，槽型（平槽 / U 型槽）、槽宽槽深与方向Engraving, grooving, profile (flat/U), width/depth and orientation. |
| 数量与供货 / Supply | 每色数量、是否达到每色 100 张起订、库存 / 定做、交期、包装与木托要求Quantity per colour, 100-sheet MOQ, stock/custom, lead time, packing and pallet needs. |
| 合规与验收 / Compliance | 目标市场标准、所需检测报告、公差与试拼验收规则Target-market standards, required reports, tolerances and trial-fit acceptance. |
| 商务 / Commercial | 贸易条款、目的港、含税口径、运费与包装费承担方式Incoterm, port, tax basis, freight and packing cost allocation. |
询价时先分清三件事：① 是 SPC 石晶墙板还是 UV 墙板（厚度与起订不同）；② 是常规款还是开槽款（板幅与加工不同）；③ 是普通膜、鎏金膜还是 UV 高光（表面与维护不同）。三点确认后再谈价格、税费与运费，能避免多数报价返工。
Clarify three things first: SPC vs UV panel (thickness and MOQ differ), standard vs grooved (size and machining differ), and standard vs gilded film vs UV gloss (surface and care differ). Confirm these before price, tax and freight to avoid most quotation rework.
墙板与槽板系统常见问题 / Wall Panels & Slatwall Systems FAQ
SPC 墙板报价不能只看“几毫米” / Compare the Full SPC Wall System
| 项目 / Item | 要点 / Meaning |
|---|---|
| SPC 还是 UV | SPC 石晶墙板常见 3.0–5.8 mm、1220/610 宽；UV 墙板 2.0–3.0 mm、每色 100 张起订。两者厚度、起订与表面工艺不同，不能混报。 |
| 芯材防水与墙体防水 | 芯材耐水不等于整体墙体防水。基层、接缝、收边和阴阳角仍按系统处理，长期浸水或室外须另核方案。 |
| 开槽的代价 | 开槽后可做平槽 / U 型槽造型缝，但板边变薄、运输易损，需图纸确认槽型与方向并加强打包防护。 |
墙板与槽板的关键计算 / Wall Panel & Slatwall Decisions
| 问题 / Question | 直接判断 / Practical Answer |
|---|---|
| WPC 室内 / 室外 | 两类配方和耐候要求不同；先选使用环境，再选型号，不建议把室内墙板直接用于日晒雨淋处。 |
| PVC/UV 大理石板 vs 饰面胶合板 | 前者通常是塑料或复合片材表面体系，后者是木质基材 + 装饰面；重量、切割、封边、固定和耐湿方式不同。 |
| 槽板方向 | 展示挂钩通常插入水平槽。若板高 2440 mm、8 条槽、中心距 300 mm，7 个间距占 2100 mm，居中时上下边距各约 170 mm。 |
挂钩起配算例：手机壳等轻小商品可先按每张板 8–12 个展示位估算；20 张板约 160–240 个，再加约 10% 备用，即 176–264 个。若要求 800 个，就是每张 40 个，需先画陈列图并检查拥挤、商品宽度和单槽承载。Hook example: For small light products, start with 8–12 display positions per panel. Twenty panels need about 160–240 hooks, or 176–264 including 10% spares. An 800-hook request means 40 per panel and requires a merchandising layout and load check.
SPC 石晶墙板和竹木碳晶 / WPC 墙板有什么区别？How does SPC wall panel differ from bamboo-charcoal / WPC panel?
直接回答 / Direct answer: 不是同一种产品。SPC 石晶墙板以石灰石粉为骨架、密度资料约 2000 kg/m³，刚性强、芯材耐水，常见 3.0–5.8 mm；竹木碳晶 / WPC 墙板为发泡体系，手感更轻更软、密度低，常见 8/9 mm 并可按企口 / 卡扣安装。两者在重量、切割、固定、价格和适用场景上都不能互换，报价前先确认客户要的是哪一类。
They are different products. SPC uses a limestone-powder skeleton at about 2000 kg/m³, is rigid and water-resistant at 3.0–5.8 mm. Bamboo-charcoal/WPC panels are foamed, lighter and softer, commonly 8/9 mm with tongue-and-groove or click fixing. Weight, cutting, fixing, price and applications are not interchangeable — establish which category the buyer means first.
SPC 墙板真的可以泡水吗？湿区能用吗？Is SPC wall panel really waterproof? Can it be used in wet areas?
直接回答 / Direct answer: 芯层以石粉为主体，资料定位为耐水、不吸水、泡水不发胀，可作为卫生间、厨房墙面候选。但要注意：板材耐水不等于整个墙体系统防水；基层处理、接缝密封、收边和阴阳角仍需按系统施工，长期浸水或室外暴露应另行确认系统方案和检测文件，不能只回答“完全防水”。
The core is stone-powder based and documented as water-resistant, not swelling when wet, so it can be a candidate for bathroom or kitchen walls. However, a water-resistant board is not a waterproof assembly: substrate preparation, joint sealing and trims are still required. Permanent immersion or exterior exposure needs a separately verified system and documents.
旧瓷砖墙面可以直接贴 SPC 墙板吗？Can SPC panels be installed directly over existing tiles?
直接回答 / Direct answer: 常见做法是用结构胶直接粘贴在平整、牢固、洁净的旧瓷砖上，减少敲砖和找平工序。前提：基层必须无空鼓、无油污、无松散；空鼓或潮湿基层应先处理，否则会影响粘贴强度。是否“免做防水”取决于原墙体防水状态和湿区条件，不能一概承诺。
A common method is structural adhesive directly onto flat, sound, clean existing tiles, reducing demolition and levelling. The substrate must have no hollow spots, grease or loose material; otherwise adhesion suffers. Whether waterproofing can be omitted depends on the existing wall and wet-area conditions, so it cannot be promised universally.
常规款和开槽款怎么选？开槽有什么风险？Standard or grooved version, and what is the grooving risk?
直接回答 / Direct answer: 常规款 1220×2440 mm，大面积铺贴接缝少、施工快；开槽款 610×2440 mm，宽度减半，适合竖条拼接和背景墙造型，可开平槽或 U 型槽做装饰线条。风险：开槽后板边变薄，搬运过程可能出现槽口损坏，必须加强打包防护并提前向客户说明；槽型、槽宽、槽深和安装方向要画图确认。
Standard 1220×2440 mm gives fewer seams and faster coverage. The grooved 610×2440 mm version suits vertical strips and feature walls with flat or U grooves. Grooving thins the edges, so transit damage is possible: strengthen packing, inform the customer and confirm profile, width, depth and orientation on a drawing.
长度可以定制吗？UV 墙板起订量是多少？Can length be customized, and what is the UV panel MOQ?
直接回答 / Direct answer: SPC 石晶墙板与 UV 墙板的长度均可定制，常规 2440 mm，可按项目加长（如 2800 / 3000 mm），加长尺寸下单前须与工厂确认产能与包装。UV 墙板资料给出每种颜色 100 张起订；低于起订量的加价和特殊颜色需另行确认。
Both SPC and UV panels can be customized in length: 2440 mm standard, with project lengths such as 2800/3000 mm subject to factory capacity and packing. The UV panel file states a 100-sheet minimum per colour; below-MOQ surcharges and special colours must be confirmed separately.
价格、税费和包装费怎么算？How are price, tax and packing charges quoted?
直接回答 / Direct answer: 本页只保留规格与配置，不含单价、税率、雕刻 / UV 加工费和木托费用。正式报价应分别说明：是 SPC 还是 UV、是否含税、是否含运费、木托 / 木箱与出口包装如何计、雕刻或开槽如何加计。把不同产品与费用口径混在一行，是报价返工的主要原因。
This page keeps specifications and configurations only, without unit price, tax rates, engraving/UV charges or pallet costs. A formal quotation should state separately whether it is SPC or UV, tax basis, freight basis, pallet/crate and export packing charges, and how engraving or grooving is added. Mixing products and cost bases in one line is the main cause of quotation rework.
WPC墙板室内和室外能否通用？Can the same WPC wall panel be used indoors and outdoors?
直接回答 / Direct answer: 室内WPC重点是气味/VOC、表面、尺寸稳定和安装；室外WPC还要核对抗UV、温差、吸水、褪色、固定间距和排水通风。没有室外耐候资料的室内型号不应直接装在日晒雨淋位置。
Indoor WPC focuses on odor/VOC, surface, stability and installation. Exterior WPC adds UV, temperature cycling, water uptake, fading, fixing spacing and drainage/ventilation. Indoor models without weathering evidence should not face sun and rain.
PVC/UV仿大理石板和仿大理石胶合板有什么区别？How do PVC/UV marble-look sheets differ from marble-look plywood?
直接回答 / Direct answer: 不是同一种产品。PVC/UV仿大理石板通常更薄、更轻，常见为胶粘或配套型材安装；大理石纹胶合板是木质芯材上的装饰面，需要考虑板边封闭、螺钉固定和木质基材受潮。即使花色相同，也不能互换价格、重量和安装方式。
They are not the same product. PVC/UV marble-look sheets are generally thinner and lighter and often glued or installed with profiles. Marble-look plywood has a wood core and requires edge sealing, mechanical fixing and moisture consideration.
槽板系统是否包含金属条和挂钩？Does a slatwall system include metal inserts and hooks?
直接回答 / Direct answer: 可以整套采购，但PI应至少分四行：槽板、金属嵌条、收边件、挂钩，并分别写颜色、材质、尺寸和数量。挂钩必须与槽型和嵌条截面匹配，不能仅凭外观照片配货。
A set can be supplied, but the PI should separate panel, metal insert, trim and hook with color, material, dimensions and quantity. Hooks must match groove and insert profiles, not only appearance.
可以做全黑槽板、嵌条和挂钩吗？Can the panels, inserts and hooks all be black?
直接回答 / Direct answer: 可以核对全黑方案，但“黑色”要拆成板面、板芯、金属粉末涂层/氧化色和挂钩颜色。不同材料反光和黑度不同，建议用一套组合样在店铺灯光下确认，而不是分别看色卡。
An all-black system is possible to check, but black must be defined for face, core, metal finish and hooks. Materials reflect light differently, so approve an assembled sample under store lighting rather than separate swatches.
槽向、槽数和槽距可以定制吗？Can slot direction, count and spacing be customized?
直接回答 / Direct answer: 可以定制，但先把尺寸画成图。2440 mm高板做8条水平槽、中心距300 mm时，7个间距共2100 mm，若居中，上下边距各约170 mm。还要标明槽宽、槽深、金属条截面和板的安装方向，否则“8槽、30cm”仍可能做反。
Customization requires a dimensioned drawing. Eight horizontal slots at 300 mm centres on a 2440 mm panel occupy 2100 mm between the first and last slots, leaving about 170 mm at top and bottom when centered. Also mark groove width, depth, insert profile and panel orientation.
20张槽板需要多少挂钩？How many hooks are needed for 20 slatwall panels?
直接回答 / Direct answer: 对手机壳等轻小商品，可先按每张板8–12个挂钩做起配：20张约160–240个，加10%备用为176–264个。若客户要800个，相当于每张40个，应先按商品宽度画陈列图，并核对同一槽的累计载荷；不能只回答“由你决定”。
For small light products such as phone cases, start with 8–12 hooks per panel: 160–240 for 20 panels, or 176–264 with 10% spares. A request for 800 means 40 per panel and needs a merchandising layout plus cumulative slot-load check.
怎样确认挂钩尺寸？How do we confirm hook dimensions?
直接回答 / Direct answer: 挂钩至少有四个尺寸：伸出长度、杆径、背板/插片尺寸和双钩间距。20 mm与200 mm很可能分别指不同维度，不能互换。用于手机配件时常先比较150/200/250 mm伸出长度，再按包装深度、重量和板槽结构选杆径与背板。
A hook has at least four dimensions: projection length, wire diameter, backplate/insert and spacing for double hooks. 20 mm and 200 mm likely describe different dimensions. Compare 150/200/250 mm projection against package depth, then select wire and backplate for the slot system.
询价必填 / Required for quotation: 用途、长×宽×厚、结构或材质、表面/颜色、数量、目标国家、标准或文件要求、贸易条款与目的港。
Required: application, length × width × thickness, construction/material, surface/color, quantity, destination, standard/document needs, Incoterm and port.
检测依据 / Test basis: 如客户需要确认该性能，请以对应第三方检测报告为准。建议核对：测试标准、测试结果、适用条件、报告编号/文件链接。 When a customer needs to confirm this performance, use the relevant third-party test report. Check test standard, test result, applicable condition and report number/file link.