产品定义 / Product Definition
封边条是用于人造板（刨花板/MDF/胶合板）断面封边的条状装饰材料，兼具美观与防护功能。材质包括PVC、ABS、亚克力PMMA、木皮等。品牌：The Wooder。标配预涂热熔胶（EVA/PUR），可热风或激光激活贴合。
Edge banding is a decorative strip material for sealing the cross-section edges of engineered panels (particle board/MDF/plywood), providing both aesthetics and protection. Materials include PVC, ABS, acrylic PMMA, wood veneer. Brand: The Wooder. Pre-glued edge banding uses EVA/PUR hot-melt adhesive for conventional or hot-air edge banding equipment. Laser/hot-air edge banding requires a dedicated functional layer for a closer zero-glue-line effect. Equipment compatibility and glue-line result should be confirmed by sample testing.
| 参数 / Parameter | 规格 / Specification |
|---|---|
| 材质 / Material | PVC / ABS / PMMA亚克力 / 木皮 Wood Veneer |
| 宽度 / Width | 12–60 mm |
| 厚度 / Thickness | 0.4–3 mm |
| 包装 / Packaging | 100m/卷（PVC/ABS） / 100m per roll |
| 产品编号 / Part No. | SH-7209等系列 |
核心卖点 / Key Selling Points: 预涂EVA/PUR热熔胶适合常规或热风封边 / 颜色纹理可按板材匹配 / PUR胶耐水耐热表现以样品测试为准 / 激光或热风无胶线效果需专用功能层和设备确认
应用场景 / Applications: 板式家具/橱柜/办公家具/衣柜封边 / Panel furniture, cabinets, office furniture, wardrobe edging
阿里关键词 / Keywords: edge banding, PVC edge banding, ABS edge banding, wood veneer edging, pre-glued edge banding, furniture edge banding, hot air edge banding, laser functional-layer edge banding
认证 / Certifications: SGS
| 参数 / Parameter | 实用判断 / Practical Guidance |
|---|---|
| 宽度 | 应略大于板厚，留出上下修边余量；例如18 mm板常从约19–22 mm宽度范围核对，最终看设备和工艺。 |
| 厚度 | 0.4–0.8 mm常用于不显眼边或经济方案；1–2 mm更适合可见边和较高耐碰要求；圆角还要匹配修边刀。 |
| 同色 | 不能只看手机照片。必须同时比较底色、木纹、光泽和纹理方向，并用实板试贴确认。 |
木质封边：真木皮封边与PVC仿木纹不是同一种产品。客户后续要自行染色或涂装时，应优先确认树种、木皮厚度、背衬和是否预涂。Wood edging: Real-wood veneer edging is not the same as wood-look PVC. If the customer will stain or finish it, confirm species, veneer thickness, backing and whether it is prefinished.
直接回答 / Direct answer: PVC成本和花色选择广，适合多数家具；ABS不含氯，部分市场或项目更偏好其材料属性和回收处理。两者都要比较耐热、冲击、加工温度、底涂和与封边胶的兼容性，不能只按价格替换。
PVC offers broad color choice and cost efficiency; ABS is chlorine-free and may be preferred by some markets. Both require checks of heat, impact, processing temperature, primer and adhesive compatibility, not price alone.
直接回答 / Direct answer: 同色要同时匹配底色、纹理、光泽和纹理方向。正确流程是先用板材色号/照片初筛，再寄实板裁片打样，最后在客户实际封边机上试贴确认。天然木皮板还要接受合理色差，不能承诺“100%无色差”。
Match base color, grain, gloss and grain direction. Shortlist from a code/photo, make a trial from a physical board cutting, then test on the customer’s edgebander. Natural veneer requires an agreed variation range rather than a 100% identical-color promise.
直接回答 / Direct answer: 报价至少写材质、宽×厚、卷长、颜色/纹理、光泽、底涂、每卷米数和卷数。本页范围宽12–60 mm、厚0.4–3 mm。18 mm板不能只写“18 mm封边”：还要留修边量，常从约19–22 mm宽度核对。
State material, width × thickness, roll length, color/grain, gloss, primer, metres per roll and rolls. This page covers 12–60 mm wide and 0.4–3 mm thick. An 18 mm board still needs trimming allowance, often checked around 19–22 mm width.
直接回答 / Direct answer: 先用供应商建议的温度区间做小批量试机，再观察开胶、胶线、发白、拉伸和修边效果。出现问题时要同时检查胶温、进给速度、压轮、板边含尘和室温，不能只判断封边条质量。
Run a small trial within the recommended temperature range and inspect bonding, glue line, whitening, stretch and trimming. Troubleshoot glue temperature, feed speed, pressure rollers, dusty edges and room temperature as well as the edging itself.
询价必填 / Required for quotation: 用途、长×宽×厚、结构或材质、表面/颜色、数量、目标国家、标准或文件要求、贸易条款与目的港。
Required: application, length × width × thickness, construction/material, surface/color, quantity, destination, standard/document needs, Incoterm and port.