柔性软瓷 / Flexible Soft Porcelain

柔性软瓷 · 概述 / Flexible Soft Porcelain Overview

柔性软瓷（MCM，改性无机矿物柔性饰面）以天然石粉等无机矿物与高分子聚合物改性复合，经配料、复合改性、低温温控成型（非高温烧结）、烘烤定型、辐照交联和表面保护涂层制成。它轻薄、可弯曲，适合曲面与旧改薄贴。本页是概述，完整档案（软瓷三层结构、低温成型工艺、GR01–GR90 全部非价格规格、PU 石 MST 规格、质检、包装与询盘清单）见软瓷石材完整档案 / Full soft porcelain & PU stone guide。

Flexible soft porcelain (MCM, modified inorganic mineral facing) is compounded from inorganic minerals such as natural stone powder with polymers, then produced through mixing, compounding, low-temperature controlled forming (not high-temperature sintering), baking, radiation cross-linking and a surface protective coating. It is thin, flexible and suited to curves and thin-bed renovation. This page is an overview; the full file (three-layer construction, forming process, all GR01–GR90 non-price specifications, PU stone MST table, QC, packing and inquiry checklist) is in the Soft Porcelain Stone full guide.

参数 / Parameter	规格 / Specification
材料体系 / Material	天然石粉等无机矿物 + 高分子聚合物改性复合（MCM）；资料称可利用无机固废，具体配方与再生料比例按型号确认Inorganic minerals such as natural stone powder compounded with polymers (MCM); the file mentions inorganic waste reuse, but formulation and recycled content are model-specific.
厚度 / Thickness	约 2.5–11 mm，按 GR 型号不同About 2.5–11 mm, by GR model.
单位面积重量 / Area weight	GR 规格表约 4.2–8.6 kg/m²，明显轻于同厚度天然石材About 4.2–8.6 kg/m² in the GR table, much lighter than natural stone of similar thickness.
主规格 / Main formats	600×1200 / 1200×2400 / 1200×3000 mm（并非每个型号三档全有，见完整档案规格表）600×1200 / 1200×2400 / 1200×3000 mm; not every model offers all three — see the full specification table.
结构 / Construction	面层（石粉 + 聚合物 + 纳米/UV 保护层）／增强层（耐碱纤维 / 玻纤网格布）／基层（改性无机矿物 MCM）Face (stone powder + polymer + nano/UV layer) / reinforcement (alkali-resistant or glass-fibre mesh) / MCM base.
成型路线 / Forming	低温温控成型 + 烘烤定型 + 辐照交联，资料称 30 余道工序Low-temperature controlled forming, baking and radiation cross-linking; 30+ operations stated.
防火与耐候 / Fire & weather	资料标注 A 级防火与较宽耐温范围；等级、区间与保色年限须以具体型号报告、质保条款和使用环境为准Class A fire and a wide temperature range are stated; class, limits and colour retention must follow the model report, warranty and environment.
配套 / Accessory	薄贴专用粘结剂（GR91，30 KG/桶）；用量与价格以报价单为准Thin-bed dedicated adhesive (GR91, 30 kg/drum); quantity and price per quotation.
应用 / Applications	内外墙饰面、旧改薄贴、圆柱 / 弧形墙 / 拱形门头等异形、室内背景墙；外墙与湿区须做系统评估与现场样板Interior/exterior facings, renovation, columns/curved walls/arches, interior feature walls; exterior and wet areas need system review and a mock-up.

旧页面参数更正：旧概述中的“400℃ 高温烧制”“约 3–4 mm / 3–6 kg/m²”“100 次冻融”“施工温度 5–40°C”“自有墨水与软瓷生产线”等表述与现行产品档案不一致或缺乏资料依据，已从本页移除。当前描述以低温成型路线、GR 规格表的厚度 / 重量范围和具体型号报告为准；冻融、施工温度与产线归属须由供货方提供可核验文件后再写。Corrected legacy parameters: earlier wording such as “400 °C firing”, “about 3–4 mm / 3–6 kg/m²”, “100 freeze-thaw cycles”, “5–40 °C application range” and “owned ink and soft-porcelain production lines” is inconsistent with the current product file or unsupported, and has been removed. This page now follows the low-temperature route, the GR thickness/weight ranges and model-specific reports; freeze-thaw, application temperature and production-line ownership need verifiable supplier documents before being stated.

结构、工艺与选型要点 / Structure, Process & Selection

三层结构 / Three layers

面层：石粉与聚合物混合，提供纹理与色彩，表面纳米 / UV 保护层，资料标注防水抗污；自洁以报告和实际环境为准。Stone-powder and polymer face with nano/UV layer described as water- and stain-resistant; self-cleaning per report and environment.
增强层：耐碱纤维或玻纤网格布，提高抗拉强度、降低开裂风险。Alkali-resistant fibre or glass-fibre mesh raises tensile strength and reduces cracking.
基层：改性无机矿物（MCM），提供柔韧性与稳定，资料称与粘结层膨胀接近。MCM base for flexibility and stability, stated to have expansion close to the adhesive layer.

怎么选 / How to select

600×1200 mm：常规墙面、柱体、灵活排版，运输施工方便。600×1200 mm for standard walls, columns and flexible layouts.
1200×2400 / 1200×3000 mm：大面积连续饰面、接缝更少，但基层平整度和搬运要求更高。1200×2400 / 1200×3000 mm for large continuous facings with fewer joints, demanding flatter substrates.
薄型（约 2.5–2.8 mm）更柔更轻，适合曲面与翻新；厚型（约 3–11 mm）肌理更深更立体。Thin (~2.5–2.8 mm) for curves and renovation; thicker (~3–11 mm) for deeper relief.
异形、外墙、湿区或冻融地区：先做基层、粘结、防水和抗风的系统评估与现场样板，再定型号。For irregular, exterior, wet or freeze-thaw work, review substrate, bonding, waterproofing and wind before fixing the model.

完整档案入口 / Full guide: GR01–GR90 软瓷规格矩阵 · PU 石 MST 规格矩阵 · 安装与配套 · 包装与装运 · 花色与图册

软瓷纹理参考 / Soft porcelain decors

正在载入 / Loading…

点击缩略图查看完整 WebP；图片用于款式预选，最终以组合实物样确认颜色、凹凸与拼缝。 / Click a thumbnail for the full WebP; images are for screening only and an assembled sample governs.

柔性软瓷图册 / Flexible Soft Porcelain catalogue · 软瓷石材图册 / Soft Porcelain Stone catalogue · 全部图册 / All catalogues

柔性软瓷常见问题 / Flexible Soft Porcelain FAQ

先把产品与系统问清 / Clarify Product & System First

问题 / Item	直接判断 / Practical answer
软瓷还是 PU 石	要轻薄可弯曲连续贴面选软瓷；要立体石纹单件造型选 PU 石。两者材料、固定与拼缝逻辑不同。
厚度与重量	软瓷厚度约 2.5–11 mm，GR 表重量约 4.2–8.6 kg/m²；不能只报“几毫米”，要同时写编号、厚度与单位重量。
外墙 / 湿区	先做基层、粘结、防水与抗风系统评估和现场样板；无系统依据时不下“保证适用”的结论。

客户常问 / Buyer Question	专业应答方向 / Response Direction
柔性软瓷的核心规格怎么确认？ How do we confirm the right specification?	先确认应用场景、GR 编号、厚度 / 尺寸、表面效果、单位重量、性能要求、目标市场标准和柜量，再匹配推荐规格与文件资料。
是否可以提供证书、检测报告或产品画册？ Can you provide certificates, test reports, or catalogs?	可根据具体型号提供对应画册、技术资料和已有检测文件；如客户要求特定市场标准，应先确认标准编号、用途与报告有效期。
样品、交期和包装如何沟通？ How should we discuss samples, lead time, and packing?	先确认样品编号、尺寸和收件信息；大货交期按数量、定做程度和生产排期回复，包装同步确认木箱 / 木托、标识和装柜要求。

应答前必问 / Confirm Before Reply

用途：内装、外墙、吊顶、隔墙、柱体、曲面或项目工程
规格：GR 编号、厚度、尺寸、颜色、表面、单位重量、结构
市场：目标国家、认证要求、当地标准、采购量
商务：贸易条款、目的港、付款方式、交期要求

推荐附件 / Recommended Attachments

柔性软瓷 / 软瓷石材产品画册
对应检测报告或体系文件 / Related test or system files
GR 规格表、包装方式、装柜参考
应用图片或项目案例 / Application photos or references

检测依据 / Test basis: 如客户需要确认该性能，请以对应第三方检测报告为准。建议核对：测试标准、测试结果、适用条件、报告编号/文件链接。 When a customer needs to confirm this performance, use the relevant third-party test report. Check test standard, test result, applicable condition and report number/file link.