SPC 与 LVT 地板 · 产品档案 / Flooring Product Guide
从板材结构到订货配置：本页集中说明 SPC 锁扣地板与 LVT 片材的材料、生产、规格、应用、安装和验收。表中尺寸与搭配是产品资料中的选型参考，具体供货范围、库存与交期以当前型号确认。
A practical guide to SPC click flooring and LVT tiles/planks: construction, production, specifications, applications, installation and inspection. Listed configurations are reference options from the product range; confirm the current model, availability and lead time before ordering.
01 · SPC 的材料与产品定位 / Material & Positioning
SPC（Stone Plastic Composite）以碳酸钙石粉、PVC 树脂和稳定/加工助剂制成刚性芯板，再结合装饰膜、透明耐磨层与表面涂层。矿物填料、树脂和助剂共同影响板材刚度、韧性、加工与稳定性；不能只以石粉多或板体白判断品质。
SPC uses a rigid core compounded from calcium carbonate, PVC resin and stabilizing/processing additives, combined with decor film, a transparent wear layer and a surface coating. Formulation affects rigidity, toughness, machining and stability; neither high mineral content nor a white core alone proves quality.
资料系列包含约 3.6–8.0 mm 板体，主系列为 1220×180 mm，另有 183 mm 宽长条、310 mm 宽板及 AB 人字拼。资料中的 2G 锁扣属于待按具体型号核对的连接形式；品牌、专利授权和安装方法应分别确认。
The documented range spans roughly 3.6–8.0 mm board thickness, with 1220×180 mm as a main format, plus 183 mm planks, 310 mm wide boards and A/B herringbone. Verify the stated 2G click profile, branding/licensing and installation method for the exact model.
芯材耐水与地面系统防水是不同问题。SPC 仍需控制温差、日晒、伸缩缝与基层湿气；表面抗污、抗划和易清洁程度取决于具体涂层，不能承诺永久不变形或免维护。Core water resistance differs from assembly waterproofing. Temperature, sunlight, expansion gaps and substrate moisture still matter. Stain/scratch resistance and cleaning depend on the coating; permanent dimensional stability or maintenance-free use is not promised.
02 · 六层结构与厚度口径 / Six-layer Reference & Thickness
以下按表面到背面说明源资料的六层示意。不同系列未必有独立平衡层或附贴垫，锁扣是在板边加工的连接结构，不是额外的一层。
This explains the source's six-layer illustration from top to bottom. An independent balancing layer or attached pad is not universal. Click joints are machined edges, not another material layer.
- ① UV 表面涂层 / UV-cured coating：帮助耐污、清洁与表面抗划。UV 指固化工艺，不直接证明可长期户外抗紫外老化。Supports stain resistance, cleaning and surface scratch performance. UV curing does not itself establish outdoor UV/weather resistance.
- ② 透明 PVC 耐磨层 / Transparent wear layer：资料包含 0.15–0.50 mm，需与板体总厚分开写；使用寿命还受客流、砂粒、养护和测试结果影响。Documented options span 0.15–0.50 mm. State it separately from board thickness; traffic, grit, care and test results also affect service life.
- ③ 装饰膜 / Printed decor film：木纹、石纹等印刷图案，需确认纹理重复、光泽和方向；EIR 同步压纹需按可选型号确认。Wood/stone printed decor determines appearance. Confirm repeat pattern, gloss and orientation; embossed-in-register (EIR) is model-dependent.
- ④ SPC 刚性芯层 / Rigid core：石粉与 PVC 复合形成板体支撑，并承担锁扣加工；配方和加工共同决定板边韧性与尺寸稳定。The mineral-PVC core supports the plank and its click profile. Formulation and processing jointly affect edge toughness and dimensional stability.
- ⑤ 平衡层（按型号）/ Balancing layer, where specified：用于结构平衡；核对实际剖面或物料表，不将示意图当成所有板型必备层。Helps balance the construction where used. Verify a section sample or bill of materials instead of assuming every model has this layer.
- ⑥ IXPE 附贴垫（可选）/ Optional attached IXPE pad：交联聚乙烯发泡垫，资料列无垫、1.0/1.5/2.0 mm；影响脚感和声学表现。不能自动替代基层防潮膜。Cross-linked polyethylene foam: no pad or 1.0/1.5/2.0 mm options are documented. Comfort and acoustics depend on the assembly; a pad is not automatically a vapor barrier.
厚度写法：4.5+1.5 mm 表示约 4.5 mm 板体＋1.5 mm 垫，总厚约 6.0 mm。资料整柜表中“基材 3.7＋耐磨层 0.3＝4.0 mm”属于报价标注口径，未逐层分列装饰膜和涂层，不能作为六层精密厚度实测结果。
Thickness notation: 4.5+1.5 mm normally means a 4.5 mm board plus a 1.5 mm pad. The source's “3.7 base + 0.3 wear = 4.0 mm” is a quotation convention, not an independently measured breakdown of every layer.
03 · 八步生产工艺 / Eight Production Stages
按资料中的八个环节展开；设备路线可能将压贴、定型等步骤联机完成，具体工序顺序以生产线确认。
Eight documented operations are described below. Lamination and sizing may be integrated on some lines; confirm the actual production sequence.
- 原料干混 / Dry blending：石粉、PVC 与助剂混合。控制原料批次、配料记录与混合均匀度。Blend mineral filler, PVC and additives; control batch traceability, formulation records and uniformity.
- 挤出成型 / Extrusion：加热塑化并挤出刚性板坯；关注芯板均匀度、密实性与边部韧性。Heat and extrude the rigid board; inspect core uniformity, consolidation and edge toughness.
- 冷却定型 / Cooling & sizing：控制厚度和平整度，稳定板坯尺寸；冷却与后续养生按生产线设定。Control thickness and flatness while stabilizing the board; cooling/conditioning depend on the line.
- 压贴复合 / Lamination：将装饰膜与耐磨层贴合，检查气泡、脱层、膜面褶皱和纹理方向。Laminate decor and wear layer; check bubbles, delamination, wrinkles and grain direction.
- UV 固化 / UV curing：涂覆并固化表面层；检查光泽一致、涂布均匀和固化效果。Apply and cure the topcoat; check gloss consistency, coverage and cure quality.
- 开槽开榫 / Click profiling：加工长短边锁扣，试拼检查拼缝、边缘高低差、崩边与连接匹配。Machine long/short edge joints; trial-fit for gaps, lipping, chipping and profile compatibility.
- 贴 IXPE / Pad attachment：按订单贴垫，检查厚度、偏位、起泡与粘贴牢度；无垫订单跳过。Attach the specified pad; check thickness, alignment, bubbles and adhesion. Omit for unpadded orders.
- 分切、终检与包装 / Final sizing, inspection & packing：按实际工序完成裁切、分级，核对尺寸、花色批号、片数和箱标。Complete sizing and grading as required; verify dimensions, decor/batch, piece count and carton labels.
04 · SPC 规格与配置矩阵 / SPC Configuration Matrix
保留产品档案中的配置关系，单位均为 mm。以下为资料规格，不构成现货、认证或全部组合均可供货的承诺。
These tables preserve the documented configuration relationships in millimetres. They do not guarantee stock, certification or availability of every combination.
手机上可左右滑动宽表格，查看垫层和花色列。 / Swipe wide tables horizontally to view pad and decor columns.
1220×180 mm 主系列 / Main plank series
| 板体厚度，不含垫 / Board | 耐磨层 / Wear | 对应基材标称值 / Nominal base | IXPE |
|---|---|---|---|
| 4.0 | 0.30 / 0.50 | 3.7 / 3.5 | 无垫 / none 1.0 / 1.5 / 2.0 |
| 4.5 | 0.30 / 0.50 | 4.2 / 4.0 | |
| 5.0 | 0.30 / 0.50 | 4.7 / 4.5 | |
| 5.5 | 0.30 / 0.50 | 5.2 / 5.0 | |
| 6.0 | 0.30 / 0.50 | 5.7 / 5.5 | |
| 6.5 | 0.30 / 0.50 | 6.2 / 6.0 | |
| 7.0 | 0.30 / 0.50 | 6.7 / 6.5 | |
| 7.5 | 0.30 / 0.50 | 7.2 / 7.0 | |
| 8.0 | 0.30 / 0.50 | 7.7 / 7.5 |
多规格系列 / Other documented formats
| 长×宽×板厚 / L×W×T | 耐磨层 / Wear | 片/箱参考 / Pieces/carton | 对应花色组 / Decor group |
|---|---|---|---|
| 1220×183×4.0 | 0.15 | 14 | 12 张参考图 / 12 images |
| 1220×183×4.5 | 0.30 | 10 | 9 张 / 9 images |
| 1200×310×5.0 | 0.30 | 6 | A组8张、B组5张 / A:8, B:5 |
| 750×150×5.0，AB 人字拼 / herringbone | 0.30 | 21 | 5 张；确认 A/B 数量 / 5; confirm A/B quantities |
| 1220×183×5.0，特殊表面 / special surface | 未提供 / Not stated | 10 | 8 张；表面性能另核验 / 8; verify finish separately |
| 1220×183×(4.5+1.5) | 0.20 | 9 | 9 张 / 9 images |
| 1220×183×6.0 | 0.20 | 9 | 9 张 / 9 images |
| 1220×183×8.0 | 0.20 | 6 | 8 张 / 8 images |
“特殊表面”原表把“防烟烫”填入耐磨层栏，不能当成厚度值，也不能由此推导防火性能；询价时补齐耐磨层数值与对应测试。
The special-finish entry originally used a cigarette-burn claim in the wear-layer field. It is not a thickness or a fire rating; request the actual wear thickness and relevant test.
GES6001–GES6028 系列 / GES series
| 规格 / Format | 耐磨层选项 / Wear options |
|---|---|
| 1220×180×4.0 | 0.20 / 0.30 / 0.40 / 0.50 |
| 1220×180×5.0 或 / or 6.0 | 0.20 / 0.30 / 0.50 |
原材料等级：全新料、混合料和回收料属于不同原料约定。“半新料”没有在资料中给出统一比例，应要求可核对的材料声明、批次与成品测试。手电透光只能观察外观，不能单独证明原料来源或排放合格。
Material grades: virgin, blended and recycled feedstock require explicit definitions. The source does not define a ratio for “semi-virgin.” Request material declarations, batch traceability and finished-product evidence; flashlight translucency alone proves neither origin nor emissions compliance.
05 · 耐磨层与应用选型 / Wear Layer & Applications
0.15、0.30、0.50 mm 可作为不同客流需求的比较起点，不能单凭厚度授予“家用/商用/重商用”认证。下表保留资料中的尺寸建议，同时列出项目批准条件。
0.15, 0.30 and 0.50 mm are useful comparison points, not automatic residential/commercial classifications. The source's candidate dimensions below require project-specific approval.
| 场景 / Use | 板体 / Board | 耐磨层 / Wear | 选型重点 / Decision |
|---|---|---|---|
| 住宅卧室、客餐厅 / Residential | 4.0–5.0 | 0.15–0.30 | 比较客流、宠物、砂粒与养护。Compare traffic, pets, grit and care. |
| 厨房、卫生间、阳台 / Kitchens, bathrooms, balconies | 4.0–6.0 | 0.30 | 仅作候选；直接淋浴、积水或露天阳台需另选获准系统。Candidate only; showers, standing water and exposed balconies need specific system approval. |
| 酒店、公寓客房 / Hotel rooms | 5.0–6.0 | 0.30–0.50 | 行李轮、清洁、声学与商业保修。Check luggage wheels, cleaning, acoustics and commercial warranty. |
| 商场、超市、学校 / Retail & schools | 6.0–8.0 | 0.50 | 滚动载荷、残余压痕、防滑和客流；更厚不直接等于抗碾压合格。Rolling load, indentation, slip and traffic need verification beyond thickness. |
| 旧房翻新 / Renovation | 3.6–4.0 | 0.15–0.20 | 先检查原地面稳固、平整、干燥，量门底和过渡高差。Check existing floor condition, door clearance and transitions. |
| 地下室、潮湿地区 / Basements | 5.0–6.0 | 0.30 | 先处理基层湿气和渗水，不能靠板材掩盖水源。Resolve substrate moisture and ingress before choosing a board. |
06 · SPC、强化地板与其他地板 / Category Comparison
| 项目 / Property | SPC | 强化复合地板 / Laminate |
|---|---|---|
| 核心结构 / Core | 矿物-PVC 刚性芯Rigid mineral-PVC composite. | 通常为高密度木纤维基材＋装饰纸/表层Usually HDF with decorative and surface layers. |
| 资料厚度 / Reference thickness | 约 3.6–8.0 mm，不含可选垫Approx. 3.6–8.0 mm, optional pad separate. | 资料对比示例 8–12 mm；按系列核对8–12 mm in source comparison; series vary. |
| 遇水判断 / Water | 芯材耐水，接缝和基层仍需控制Water-resistant core; joints and substrate still matter. | 木基芯受水影响；耐水系列与普通系列应分别判断Wood core is moisture-sensitive; assess water-resistant models individually. |
| 温度与尺寸 / Stability | 仍需按安装说明留缝、控制热源Requires specified expansion allowance and heat control. | 按温湿度、基层和伸缩要求选型Select for humidity, substrate and expansion requirements. |
| 排放与使用 / Emissions & use | 对比相应产品报告、适用场景、维护和保修；不能用材料名称或单一 E0/CARB 标签推断整类产品优劣。Compare product-specific evidence, use, care and warranty; a material name or label alone does not establish superiority. | |
复合实木地板保留真实木面层触感，应另核对面层厚度、基层和木材湿度；WPC 地板名称可能指室内复合地板或户外塑木，需明确环境与构造。户外产品参见 WPC 产品页，整屋搭配可结合 室内墙板、踢脚线和过渡收边。
Engineered wood offers a real wood face and needs separate checks of face thickness, substrate and moisture. WPC can refer to different indoor or outdoor constructions; define the environment and system. Coordinate wall finishes, skirting and transitions for a complete interior.
07 · LVT 片材专题 / LVT Tiles & Planks
LVT（Luxury Vinyl Tile）使用 PVC、填料及相应配方，通常比 SPC 刚性芯板更柔顺。片材/条材不能因为“可弯”就按卷材折叠储存。木纹、石纹、地毯纹和水磨石纹可供样式筛选；脚感、耐磨与清洁性能依实际结构确认。
LVT uses PVC, fillers and a formulation generally more flexible than rigid-core SPC. Flexible tiles/planks should not be folded or stored as sheet-vinyl rolls. Wood, stone, textile and terrazzo designs are available for selection; comfort, wear and cleaning depend on the construction.
| 比较 / Compare | LVT | SPC |
|---|---|---|
| 厚度范围 / Thickness | 本资料具体表格含 1.2–4.0 mm；概述含约 1.5–5 mmTables: 1.2–4.0 mm; overview: roughly 1.5–5 mm. | 资料约 3.6–8.0 mm 板体Documented board range roughly 3.6–8.0 mm. |
| 安装 / Installation | 干背胶贴、自粘、自沉或锁扣，按型号区分Dryback, self-adhesive, loose lay or click, by model. | 本系列以锁扣悬浮铺为主This range is primarily floating click installation. |
| 基层与脚感 / Subfloor & feel | 较柔顺；薄片尤其需平整基层，胶与基层兼容More flexible; thin products need a smooth substrate and compatible adhesive. | 较硬实；基层不平会使板和锁扣承受不均匀载荷Firmer feel; uneven substrate stresses planks and joints. |
干背系列 / Dryback options
| 厚度 / Thickness mm | 耐磨层 / Wear mm | 花色 / Decors |
|---|---|---|
| 2.0 | 0.20 / 0.30 | GES2001–GES2026 |
| 3.0 / 4.0 | 0.20 / 0.30 / 0.50 |
914.4×152.4 mm 自粘 / 干背系列 / Self-adhesive or Dryback
| 厚度 / Thickness mm | 耐磨层 / Wear mm |
|---|---|
| 1.2 / 1.5 | 0.10 / 0.15 / 0.20 |
| 1.8 | 0.10 / 0.15 / 0.20 / 0.30 |
| 2.0 / 2.5 / 3.0 | 0.10 / 0.15 / 0.20 / 0.30 / 0.40 / 0.50 |
自粘指产品自带胶层；干背需现场选胶；自沉式也可能需要周边、网格或满涂固定，不能把三者统称“免胶”。先确认产品背面结构再安排施工。
Self-adhesive includes a factory-applied adhesive; dryback requires site-applied adhesive. Loose lay may still require perimeter, grid or full-spread fixing. Identify the actual backing before specifying installation.
| 应用 / Use | 确认项 / Check |
|---|---|
| 办公室 / Offices | 脚轮、桌椅点载荷、声学与纹理Castors, furniture loads, acoustics and decor. |
| 医院、学校 / Healthcare & schools | 清洁消毒剂兼容、防滑、接缝卫生与项目规范Cleaning-agent compatibility, slip, joint hygiene and project specification. |
| 酒店、餐厅、门店 / Hospitality & retail | 高客流、污渍、表面维护与施工时间Traffic, stains, maintenance and installation schedule. |
| 旧地面翻新 / Refurbishment | 空鼓、原地面粘结、砖缝找平、门底高度Loose flooring, adhesion, tile-joint smoothing and door clearance. |
08 · 安装、配件与使用边界 / Installation & Accessories
- 检查基层：先检查坚实、平整、干燥和清洁，记录湿气测试；旧砖空鼓、裂缝和宽深砖缝先处理。Check substrate firmness, flatness, dryness and cleanliness; record moisture testing and address loose tiles, cracks and deep joints.
- 画排版：确认方向、门洞、过渡条和周边伸缩位置；AB 人字拼需匹配左右板和数量，不能以普通直铺锁扣替代。Plan direction, openings, transitions and expansion allowance. A/B herringbone needs matching left/right pieces and quantities.
- 确认垫层：有 IXPE 不代表可省略防潮处理，也不代表可再叠软垫；依据该型号允许的基层和垫层组合施工。An attached pad does not automatically replace moisture control or permit extra soft underlay. Follow the approved assembly.
- 处理环境：日晒、地暖、落地窗、高温和地下室湿气需在选型时说明，按制造商要求处理调温、伸缩和使用范围。Disclose sun exposure, underfloor heating, glazing, heat and basement moisture; follow model-specific limits.
- 配齐部件：地板、许可的垫层/膜、踢脚线、门口和高差过渡条、终端收边；LVT 胶贴另列底涂、找平和胶黏剂。Schedule flooring, permitted underlay/membrane, skirting, doorway/reducer/end trims; add primer, leveling and adhesive for gluedown LVT.
日常清洁先清除砂粒，按涂层维护说明清理污渍；桌椅脚加合适保护垫，移动重物时保护板面与锁扣。原资料的“不打油保养”不能理解为不需清洁维护。
Remove grit and clean according to the finish instructions; protect furniture feet and the floor when moving heavy objects. No oiling requirement does not mean no maintenance.
通用安装边界参考：MSI 刚性芯安装说明、Karndean 自沉式安装说明。这些资料帮助解释安装原则，不是本页产品的认证或安装授权。 / These references explain general principles; they do not certify or approve the products on this page.
09 · 质量控制与文件核验 / QC & Evidence
| 检查项 / Item | 验收操作 / Method | 需记录 / Record |
|---|---|---|
| 厚度与尺寸 / Dimensions | 多点测板体、耐磨层和垫层，检查长度宽度、直角与平整Measure board, wear and pad separately; check size, squareness and flatness. | 测量方法、抽样量、允差、实测值Method, sample size, tolerance and result. |
| 锁扣 / Click joints | 不同箱取样拼装，检查拼缝、高低差、崩边、拆装状态Trial-fit samples across cartons; check gaps, lipping, chips and assembly. | 样板照片、锁扣形式与判定条件Photos, profile and acceptance conditions. |
| 表面与膜层 / Surface | 检查气泡、分层、压纹对位、光泽、色差和纹理重复Inspect bubbles, delamination, emboss alignment, gloss, shade and repeats. | 批准样、批号与可接受范围Approved sample, batch and allowable variation. |
| 原料与垫层 / Core & pad | 核对材料声明、垫层厚度/粘结、加工断面Check declarations, pad thickness/adhesion and cut edges. | 型号、批次和供应文件Model, batch and supporting documents. |
| 功能表现 / Performance | 按用途核对耐磨、防滑、尺寸稳定、压痕/滚动载荷、燃烧、排放与声学资料Review wear, slip, stability, indentation/rolling load, fire, emissions and acoustics as relevant. | 标准、样品型号、结果、条件、报告编号Standard, sample, result, conditions and report ID. |
源资料提出厚度 ±0.1 mm，可作为洽谈验收公差的起点，尚不是所有产品已达标的证据。“无缝”“B1”“E0”等也应核对适用标准和对应型号报告；不给未提供报告的产品自动添加证书标识。The source proposes ±0.1 mm thickness tolerance as a discussion point, not proof that every product achieves it. Seam, fire and emissions claims must match the model and evidence; no certificate badge is assumed.
06 合集补充配置与包装口径 / Supplementary configurations from the combined archive
《SPC地板与WPC墙板》是 06 文件夹内的另一份合集，以下配置独立保留；07 独立 SPC 档案为本页主干，不把不同系列的耐磨层或片箱数互相覆盖。单位 mm，主规格 180×1220，4.5 mm 款为 228×935。 / These supplementary configurations are separate from the main 07 SPC archive. Do not interchange wear layers or carton counts between series.
| 总厚 / Total thickness | 结构 / Build | 耐磨层 / Wear layer | 连接 / Joint | 片/箱 / Pcs/carton |
|---|---|---|---|---|
| 3.6 | 纯 SPC / SPC only | 0.15 | 2G | 14 |
| 4.2 | 纯 SPC / SPC only | 0.20 | 2G | 14 |
| 4.5 | 纯 SPC，228×935 | 0.35 | 2G | 14 |
| 6.0 | 4.5 SPC + 1.5 IXPE | 0.35 | 2G | 12 |
| 6.5 | 5.0 SPC + 1.5 IXPE | 0.50 | 2G | 10 |
| 8.0 | 6.5 SPC + 1.5 IXPE | 0.50 | 2G | 8 |
| 10 | 竹塑 / Bamboo plastic，191×1220 | 0.40 | 插入式 / Insert joint | 10 |
合集包装参考：纸箱＋托盘，20 尺柜 8 托、40 尺柜 14 托，历史起订为一柜。须重新核对托盘外形、箱重与船公司/陆运限重，不能仅按托数承诺装载。竹塑不是 SPC 同款结构。 / Source reference: cartons and pallets, 8 pallets/20 ft or 14/40 ft, historical one-container MOQ. Verify pallet dimensions and payload; bamboo plastic is not the same SPC construction.
10 · 包装、数量与装运核算 / Packing & Quantity Planning
以下是 1220×180 mm 无垫主系列的资料参考，与 183 mm 现货系列分开使用。面积按名义长宽计算，最终按箱标有效覆盖面积和实际包装确认。
These reference figures apply to the unpadded 1220×180 mm main series, separately from 183 mm formats. Calculated area uses nominal dimensions; confirm usable coverage on the carton label and the actual packing.
| 板厚 / Board mm | 片/箱 / Pieces | 理论㎡/箱 / Nominal m² | 资料箱重 / Reference kg | 资料㎡/托 / Reference m²/pallet |
|---|---|---|---|---|
| 4.0 | 12 | 2.6352 | 约 / approx. 22.2 | 约 / approx. 65 |
| 5.0 | 10 | 2.1960 | 约 / approx. 23.3 | 约 / approx. 65 |
| 6.0 | 8 | 1.7568 | 约 / approx. 22.5 | 约 / approx. 65 |
| 8.0 | 7 | 1.5372 | 约 / approx. 26.3 | 约 / approx. 55 |
每托面积是原资料近似值，不是上述每箱面积的整数倍；须按实际箱/托重算。加垫、AB 板、混色或不同尺寸会改变片/箱和箱/托，不能套用同一包装表。
The source's pallet areas are approximate and are not whole-carton multiples of the calculated coverage. Recalculate from the actual cartons per pallet. Pads, A/B pieces, mixed decors and formats may change the packing.
算例：300㎡净面积按 5% 损耗准备 315㎡；若选 5 mm、10片/箱、2.196㎡/箱，则向上取整为 144 箱，实际名义面积 316.224㎡。复杂排版、人字拼和备品数量另算。
Example: 300 m² plus 5% waste gives 315 m². At 2.196 m² per carton, round up to 144 cartons, or 316.224 m² nominal coverage. Allow separately for complex layouts, herringbone and spares.
装运表应列每款箱数、净/毛重、托盘尺寸、高度和总重，按具体柜型及运输路线校核重量与体积。原资料按 28 吨推算的整柜面积及 LVT 20GP 面积不直接作为订货装载承诺。
A loading plan needs cartons, net/gross weight, pallet dimensions/height and total weight per SKU. Check the actual container and route. Historical source estimates based on 28 tonnes and LVT 20GP coverage are not confirmed loading capacities.
11 · 一次问清的询盘清单 / Complete Inquiry Checklist
| 字段 / Field | 要写清的内容 / Required detail |
|---|---|
| 项目与环境 / Project | 国家、住宅/商用、面积、客流、湿区、日晒、地暖、基层情况Country, use, area, traffic, moisture, sunlight, heating and substrate. |
| 结构 / Construction | SPC或LVT、长宽、板体厚度、耐磨层、垫层材质/厚度、原料约定SPC/LVT, size, board/wear/pad thickness, pad type and material declaration. |
| 外观 / Appearance | 系列＋花色编号、大样、光泽、EIR、批次色差范围Series/code, large sample, gloss, EIR and shade range. |
| 安装 / Installation | 锁扣或胶贴形式、直铺/AB、配件、防潮与找平方案Click/adhesive method, straight/A-B layout, trims, moisture and leveling plan. |
| 数量与供货 / Supply | 每色面积、整箱数量、MOQ、库存/定做、交货节点、包装、港口与贸易条款Area per color, whole cartons, MOQ, stock/custom, dates, packing, port and Incoterm. |
| 验收 / Acceptance | 公差、试拼样、抽检规则、对应测试报告与商业保修Tolerances, trial-fit sample, sampling criteria, reports and warranty. |
源资料的 25–30 天交期，以及特定系列 100㎡、单色 300㎡、定制色 1000㎡以上的起订条件属于历史业务参考；当前订单需分别确认每色 MOQ、生产完成日和出运日。
The source's 25–30-day lead time and series-specific 100 m², 300 m² per color and 1000+ m² custom-color minimums are historical references. Confirm current per-color MOQ, production completion and shipment dates independently.
12 · SPC / LVT 花色与图册 / Decors & Catalogues
花色按原资料所属产品分组。GES 和 8001 编号保留原名称；未提供正式色号的 73 张图采用“规格＋参考图序号”，询价时附图确认。样图不代表当前库存或可跨产品互换。
Decors follow the product groups in the source. GES and 8001 codes are retained; 73 uncoded images use format plus reference-image number, so include the image in an inquiry. Images do not establish current stock or cross-product compatibility.
SPC · GES6001–GES6028（28色）
正在载入 / Loading…
SPC 多规格参考图（73张）/ Other SPC formats (73 images)
正在载入 / Loading…
LVT · GES2001–GES2026（26色）
正在载入 / Loading…
LVT · 8001 系列（7色）
正在载入 / Loading…
点击查看完整 WebP；屏幕颜色、纹理比例与实物可能不同。先用色卡筛选，再用大板样核对光泽、重复纹理和批次范围。
Click for the full WebP. Screen color and texture scale can differ from the physical product. Screen decors first, then approve a larger sample for gloss, repeats and batch range.
SPC 地板图册 / SPC catalogue · 热销彩膜图册 / Decorative film catalogue · 自然雨地板图册 / Natural Rain catalogue · 全部图册 / All catalogues
SPC地板常见问题 / SPC Flooring FAQ
SPC报价不能只看“几毫米” / Compare the Full SPC Structure
| 项目 / Item | 要点 / Meaning |
|---|---|
| 4.5+1.5 mm | 通常表示4.5 mm地板主体＋1.5 mm附贴垫，总厚约6.0 mm；必须让报价方确认其标注方法。 |
| 耐磨层 | 与总厚度是两个参数。酒店/餐厅等高客流场景应单独比较耐磨层、表面处理和保修条件。 |
| 锁扣与基层 | 锁扣强度、基层平整度、伸缩缝和日晒温差会影响安装效果，不能只用“防水”判断适用性。 |
面积算例：300㎡项目按5%损耗先准备315㎡；箱数＝315÷每箱覆盖面积，向上取整。深色接近黑色的产品更容易显灰尘、划痕和批次色差，应先看大板色样和现场光线。Area example: For 300 m² with 5% waste, plan 315 m². Cartons = 315 divided by coverage per carton, rounded up. Very dark floors show dust, scratches and shade variation more easily, so approve a large sample under project lighting.
可以提供深色或指定木纹的SPC地板吗？Can you supply dark colors or a specified wood grain?
直接回答 / Direct answer: 可以寻找深棕或近黑色，但应先在项目灯光下看较大色板。深色更显灰尘、脚印和浅色划痕；餐厅或酒店还应选择能隐藏污渍的纹理和适当光泽，不能只按手机图片定色。
Very dark brown or near-black colors can be sourced, but review a large sample under project lighting. Dark floors show dust, footprints and pale scratches more readily; hospitality projects also need suitable grain and gloss.
“5 mm”“6 mm”或“4.5+1.5 mm”怎样理解？What do 5 mm, 6 mm or 4.5+1.5 mm mean?
直接回答 / Direct answer: “4.5+1.5 mm”通常表示4.5 mm地板主体加1.5 mm IXPE等附贴垫，总厚约6 mm；但“5 mm”可能是裸板总厚，也可能未含垫。比较报价时要并列写：总厚、基材厚、耐磨层、附贴垫厚度、锁扣和每箱面积。
“4.5+1.5 mm” normally means 4.5 mm flooring plus 1.5 mm attached underlay, about 6 mm total. A “5 mm” offer may exclude underlay. Compare total thickness, core, wear layer, pad, click profile and carton coverage.
SPC是否适合酒店、餐厅或沿海地区？Is SPC suitable for hotels, restaurants or coastal areas?
直接回答 / Direct answer: 可以作为候选，但餐厅/酒店要先按高客流检查耐磨层、防滑、污渍清洁、锁扣和商业使用保修；海滨项目还要控制基层含水率、砂粒磨损、强日晒和温差。SPC基材耐水不代表水能长期留在接缝或基层。
It can be considered, but restaurants and hotels require checks of wear layer, slip, stain cleaning, click strength and commercial warranty. Coastal projects also need subfloor moisture, sand abrasion, strong sunlight and temperature control. Water-resistant core does not mean water may remain under joints.
怎样按面积计算订购数量？How do we calculate order quantity from floor area?
直接回答 / Direct answer: 订购面积＝净面积×(1＋损耗率)。规则直铺通常先按5%，斜铺、多房间或复杂切割可按8–12%做初算，再由排版确认。300㎡按5%为315㎡；箱数＝315÷每箱覆盖面积并向上取整，不能只报“300㎡整”。
Order area equals net area times one plus waste. Start around 5% for straight layouts and 8–12% for diagonal or complex rooms, subject to layout. For 300 m² at 5%, order 315 m²; cartons are 315 divided by carton coverage, rounded up.
地板系统需要哪些配件？Which accessories are needed for a flooring system?
直接回答 / Direct answer: SPC系统通常还要确认附贴垫或独立垫、防潮膜、踢脚线、门口压条、不同地面过渡条和收边。若已有附贴垫，不要未经系统允许再叠加软垫，以免锁扣受力和保修受影响。
An SPC system may need attached/separate underlay, moisture membrane, skirting, doorway and transition trims. Do not add extra soft underlay beneath an attached-pad product unless the system permits it, as click joints and warranty may be affected.
询价必填 / Required for quotation: 用途、长×宽×厚、结构或材质、表面/颜色、数量、目标国家、标准或文件要求、贸易条款与目的港。
Required: application, length × width × thickness, construction/material, surface/color, quantity, destination, standard/document needs, Incoterm and port.
检测依据 / Test basis: 如客户需要确认该性能，请以对应第三方检测报告为准。建议核对：测试标准、测试结果、适用条件、报告编号/文件链接。 When a customer needs to confirm this performance, use the relevant third-party test report. Check test standard, test result, applicable condition and report number/file link.