胶合板

01 · 产品定义与资料范围 / Definition & Documented Scope

胶合板是由多层旋切单板经干燥、涂胶、纵横交错组坯、热压而成的木质人造板，常见为奇数层结构。资料中的商用与建筑模板系列以全桉木芯为主线，面背可选桃花心（Mahogany）、科技木（Recon / Engineered）、桦木（Birch，含白桦、枫桦）等；胶黏剂分为脲醛（UF）、三聚氰胺改性脲醛（MUF）与酚醛（PF）体系；成品可再做三聚氰胺浸渍纸热压、UV 高光或 PET 肤感饰面。“海洋板”“防水胶”等名称不能代替具体胶合等级、芯材与目标标准。

Plywood is an engineered wood panel built from dried, glued rotary veneers laid crosswise and hot-pressed, usually in odd ply counts. The commercial and formwork lines in these documents are mainly all-eucalyptus cores; faces may be mahogany, recon/engineered veneer or birch (including white birch and maple birch). Adhesive systems are UF, MUF and PF, and finished panels may additionally carry melamine, UV or PET surfaces. Names such as “marine” or “waterproof glue” do not replace a defined bond class, core and destination standard.

厚度换算：资料常用“厘”标注，1 厘 = 1 mm。本页保留资料原标注，并在表头注明 mm。 / Thickness is often written as “li”, where 1 li = 1 mm; source notation is retained with mm in the table headers.

六份资料的内容去向 / What Each Document Covers

引用口径：本页数值来自上述六份业务资料，作为型号与配置参考，不代表现货、全部组合可供货或已取得认证。密度、重量、周转次数、认证与出口准入须按具体型号、当批生产与有效文件核验。Basis: figures come from the six documents above and are model/configuration references, not a stock, availability or certification promise. Density, weight, re-use, certification and market access must be verified by model, production batch and valid documents.

02 · 生产工艺与一次/二次成型 / Production Flow & Single/Double Pressing

商用胶合板资料列出 12 道工序。各环节的精细程度正是三档产品差异的来源，而不是先按“高、中、低档”定名再谈性能。

The commercial document lists twelve operations. How carefully each step is controlled is what separates the three build grades — the grade label itself proves nothing.

1. 原木旋切 / Peeling：原木截断、剥皮后旋切成连续单板。Logs are cut, debarked and rotary-peeled into continuous veneer.
2. 单板干燥 / Drying：烘干至适合胶合的含水率；干燥不均会带来翘曲与胶合不良。Veneer is dried to a gluing-compatible moisture content; uneven drying causes warp and poor bonds.
3. 中板分选 / Core grading：按等级分拣，剔除缺陷；这是三档差异最直接的环节。Core veneers are graded and defects removed — the most direct source of grade difference.
4. 中板铺装 / Lay-up：纵横交错按层数组坯。Veneers are laid crosswise in the required ply count.
5. 修补 / Repair：挖补、修补中板缺陷；简单修补与全修补对应不同档位。Defects are patched; simple versus full repair distinguishes the grades.
6. 涂胶 + 冷压 / Gluing & pre-pressing：预压成型，定位板坯。Glue is applied and the assembly pre-pressed to fix the lay-up.
7. 热压 / Hot pressing：高温高压固化胶合，胶种（UF / MUF / PF）在此形成耐水等级。Heat and pressure cure the adhesive; the UF/MUF/PF system determines moisture resistance.
8. 刮灰 / Filling：填补表面缝隙与缺陷。Surface gaps and defects are filled.
9. 砂光 / Sanding：砂去毛面、提升平整度；正面/背面砂光比例是档位指标。Sanding removes roughness and improves flatness; face/back sanding coverage is a grade indicator.
10. 贴单板 / Face veneering：表面贴面（桃花心 / 科技木 / 桦木等）。Face veneer such as mahogany, recon or birch is applied.
11. 抛光 / Polishing：精抛板面。The face is polished.
12. 裁边、修边、打包 / Sizing & packing：定尺、修边、成包出厂。Panels are cut to size, edged and packed for despatch.

一次成型与二次成型 / Single vs Double Pressing

三档做工差异（全桉木） / Three Build Grades

以下为 06 源档案图片，图中品牌及工程效果仅作资料示例，不代表汇俱自有工厂或已交付项目；以实物样板确认。Source-document references, not claims of Huiju-owned factories or completed projects. Confirm against physical samples.

03 · 芯材、三类面与按饰面选芯 / Cores, Three Face Types & Matching

芯材等级、空洞、含水率与胶种决定板子的结构表现；面背只决定外观与后续加工。下单时应同时写明“芯材＋胶合＋面背＋厚度公差”，不能只写“18mm plywood”。

Core grade, voids, moisture and adhesive govern structural behaviour; face and back govern appearance and downstream finishing. Order as core + bond + face/back + thickness tolerance, never as “18 mm plywood” alone.

家具板可选芯材 / Optional Cores

家具板三种表面 / Three Furniture-Grade Faces

按用途选芯 / Core Selection by Use

“进口/出口”“E0”“阻燃”“防虫”等标签必须绑定到具体型号、结构、检测标准与报告范围。资料中出现的水煮时长、原料等级与认证表述，本页按资料口径引用，不作已取证结论。Labels such as export, E0, fire-retardant or insect-resistant must be bound to a model, construction, test standard and report scope. Boiling times, raw-material grades and certifications quoted here follow the source wording and are not presented as verified conclusions.

04 · 商用全桉木规格与选档 / Commercial Grades & Sizes

资料按“饰面越薄、越要露底，板就要越平、料就要越好”的原则给出选档：先看客户表面做法，再决定料等级与砂光程度。单位：规格列的“厘”＝mm。

The document's selection rule is that the thinner and more revealing the finish, the flatter and better the board must be. Start from the customer's surface method, then choose material grade and sanding coverage. “li” in the size column = mm.

按客户饰面选档 / Grade by Face Method

广雅 · 一次半成型与真阻燃规格 / Economy Sizes

kg/张与整柜张数为资料参考值，按 4×8（1220×2440 mm）口径记录；金额列已移除。

资料对“真阻燃”的规格记录并不完全一致：价格表在 9/12/15/18 厘单列该项，而库存备注提到 8/11/14 mm 有库存。本页保留两处原始口径，请按当批生产与阻燃检测报告确认，不将“阻燃板”字样当作检测结论。The source is not fully consistent on “fire-retardant” sizes: the price table lists 9/12/15/18 li while the stock note mentions 8/11/14 mm. Both are retained; confirm against the production batch and a fire test report — the printed wording on the board is not a test result.

广杂规格 / Medium-Grade Sizes

“弯板”为资料中的单独条目，曲面/成型用途与允许半径须在下单时确认，不能按平板口径直接套用。 / “Curved board” is a separate documented item; confirm the intended curvature and allowable radius rather than treating it as a flat panel.

家具板 4×8（1220×2440 mm）饰面与芯材规格 / Furniture-Grade Faces & Cores

阻燃家具板规格 / Fire-Retardant Furniture Board

加长家具板 · 双桃 E0 可做长度 / Extended-Length Furniture Board

资料按 2.6 / 2.8 / 3.05 / 3.2 m 四档长度给出同一批规格组合，本表保留“可做”关系；具体长度、公差与运输限制须按订单确认。 / The source gives the same size set across four lengths; this table preserves the availability relationship. Confirm exact length, tolerance and transport limits per order.

现货与交期（资料口径）：资料记录广杂各规格有现货；广雅“真阻燃”8 / 11 / 14 mm、家具板黑胶 E0 的 5 / 9 / 12 / 15 mm 有库存。上述为历史库存记录，当前在库、生产周期与交期须逐单核实，不作为现货承诺。Stock note: the source records stock for medium-grade sizes and for the listed fire-retardant and BWR E0 thicknesses. This is a historical record; current availability and lead time must be checked per order and is not a stock promise.

05 · 三聚氰胺面胶合板 / Melamine Faced Plywood

三聚氰胺面胶合板（MFP / MFC）＝胶合板芯＋表面浸渍三聚氰胺树脂的装饰纸，经高温高压一次热压成型。出厂自带装饰面，家具厂裁切封边后即可使用，省掉喷漆或贴皮工序。

Melamine faced plywood is a plywood core plus a decorative paper impregnated with melamine resin, consolidated in one hot press. The panel leaves the factory already faced, so furniture makers can cut and edge-band without painting or veneering.

饰面四步工艺 / Four Process Steps

资料强调树脂膜是“固化在板上”而非后期贴 PVC 膜；这解释了附着力与耐磨表现的差异。具体耐热、耐磨、耐污数值仍须绑定型号与测试条件。The document stresses that the resin film is cured onto the panel rather than applied as a later PVC film, which explains adhesion and wear behaviour. Specific heat, wear and stain figures still require a model and test conditions.

饰面六大卖点（资料口径） / Six Documented Points

花色分类与适用 / Decor Categories & Use

色号选自资料中的电子色卡与截图说明（含 SHZ003/SHZ004、SHP3029-1、22SH260、22SH372-3、SH21011-3 等）。完整色卡以工厂电子文件为准，来图来样可询价打样。 / Codes are taken from the source colour-card images and captions. The complete card follows the factory electronic file; custom matching can be quoted on request.

五大高端子系列 / Five Premium Sub-Series

客户画像与卖点 / Buyer Profile & Selling Point

基材与工艺规则 / Substrate & Process Rules

• 标准芯：双桃 E0 家具板芯；黑胶芯：BWR（资料称水煮 3 小时不开胶）；阻燃芯：阻燃板芯。Standard core: double-mahogany E0 furniture core; black-glue core: BWR (documented 3 h boiling test); fire-retardant core.
• 双面 MFC：两面均为三聚氰胺饰面，芯体不含桃花心面。Double-sided MFC: melamine on both faces, core without the mahogany face.
• 单面 MFC：另一面保留桃花心面，适合背面不可见的用途。Single-sided MFC: the other face remains mahogany, suitable where the back is not seen.
• 白、黑等常用素色使用标准芯；其他素色与木纹按型号使用升级板芯，具体以型号与色号确认。Common white/black solids use the standard core; other solids and woodgrains use an upgraded core by model and colour code.
• 高端系列（繁花/仿真木皮等）在同厚度、同芯材、同单双面基础上选用更高档饰面纸，图册与色号须按子系列核对。Premium sub-series use higher-grade decor paper on the same thickness, core and one/two-sided basis; confirm album and colour code per sub-series.

生产主体归属：来源图册自述为“Sunhouse Indonesia 色卡”及电子图册文件，本页按资料引用其色号与分类，不据此声称汇俱自有工厂或自有生产线；实际生产主体、产地与供货工厂随订单文件确认。Manufacturing attribution: the source albums describe themselves as a Sunhouse Indonesia colour card and electronic files. Colour codes and categories are quoted from the source only; this page does not claim Huiju ownership of a factory or production line. The actual producer, origin and supplying mill are confirmed in the order documents.

以下为 06 源档案图片，图中品牌及工程效果仅作资料示例，不代表汇俱自有工厂或已交付项目；以实物样板确认。Source-document references, not claims of Huiju-owned factories or completed projects. Confirm against physical samples.

06 · UV 高光、PET 肤感、长门板与封边 / UV, PET, Long Doors & Edge Banding

UV 与 PET 都在三聚氰胺板基础上再加一层表面处理：UV 做高光镜面，PET 做哑光肤感。资料主推 6 / 9 / 18 mm，可配黑胶芯、阻燃芯与 2.8 m 加长。

UV and PET add a further surface treatment on top of a melamine-faced panel: UV for a high-gloss mirror finish, PET for a matt soft-touch finish. The document highlights 6/9/18 mm with BWR or fire-retardant cores and 2.8 m lengths.

UV 高光板 / UV High-Gloss

PET 肤感板 / PET Soft-Touch

三种饰面对比 / Three Surface Options

抗变形多功能实木板（长门板） / Anti-Warp Door Panel

资料提示：用纯胶合板做 2.8 m 长门板存在变形风险，建议双面饰面；当客户不要欧松板/密度板时，可选这款三层结构板。

The document warns that a 2.8 m door in plain plywood risks warping and recommends two-sided facing; where OSB or MDF is not acceptable, this three-layer construction is offered instead.

配套封边条（颜色对板） / Matching Edge Banding

封边颜色必须按客户选定的板面色号对版，下单时与板色一起报，不要分开确认；试单量不足起订量时建议先打样，不强行走量。Edge-banding colour must be matched to the customer's chosen board colour code and ordered together with the panel, not separately. Where a trial order is below MOQ, sample first rather than forcing volume.

07 · 包装板与沙发板 / Packing Board & Sofa Board

两款均为全桉木胶合板，标准尺寸 1220×2440 mm（4×8 ft），密度约 630 kg/m³。区别在板芯原材料等级：包装板面向出口包装、托盘、木箱、家具背板等外观要求不高但成本敏感的场景；沙发板用更高等级板芯，面向沙发框架、家具内板、床板等受力场景。

Both are all-eucalyptus plywood at 1220 × 2440 mm (4 × 8 ft) with a documented density of about 630 kg/m³. They differ in core grade: packing board targets export packing, pallets, crates and furniture backs where appearance is secondary; sofa board uses a higher-grade core for sofa frames, furniture internals and bed slats.

• 包装板：厚度 5–18 mm 全规格，走量款，成本优先。Packing board: full 5–18 mm range, volume-oriented and cost-first.
• 沙发板：9 / 11 / 17 mm 三个常用厚度，板芯更结实、平整度更好，适合家具受力结构。Sofa board: 9/11/17 mm, firmer core and better flatness for load-bearing furniture structures.

分厚度规格与装柜参考 / Thickness, Weight & Loading Reference

金额列已移除；kg/张、装柜张数与每包张数按资料保留。沙发板仅 9 / 11 / 17 mm 有对应规格。

沙发板仅 9 / 11 / 17 mm 三个规格有现货；其余厚度为包装板规格。当前在库须逐单确认。 / Sofa board is documented as stocked in 9/11/17 mm only; other thicknesses are packing-board sizes. Confirm current availability per order.

目标市场与客户 / Target Markets

包装与起订规则：每包张数以 5 或 0 结尾；包高不超过 95 cm，每包重量不超过 1.8 吨；1 个 40HQ 柜起订，混柜可按厚度拼柜。Packing & MOQ: bundle counts end in 5 or 0; bundle height under 95 cm and weight under 1.8 t; one 40HQ minimum with mixed-thickness loading possible.

以下为 06 源档案图片，图中品牌及工程效果仅作资料示例，不代表汇俱自有工厂或已交付项目；以实物样板确认。Source-document references, not claims of Huiju-owned factories or completed projects. Confirm against physical samples.

08 · 建筑模板三档总览 / Three Formwork Routes

三档模板不是同一张板的高低配，而是芯材、胶种、表面体系与周转定位都不同。下表用于横向比较，完整尺寸与重量表见各自章节。

The three formwork routes are not one board at three prices: core, adhesive, surface system and reuse positioning all differ. This table is for comparison; full dimensions and weights are in the following sections.

周转次数边界：周转次数不是板材单一承诺，受混凝土配比、支撑体系、脱模剂、拆模方式、边角损伤、清洁、存放与施工节拍共同影响。资料中的 3 次、10 次以上与 30 次属于对应档位的参考口径，应把目标表面、施工方法与复用条件写入技术确认，并保留验收记录。Reuse boundary: reuse cycles are not a board-only guarantee; concrete mix, support, release agent, stripping, edge damage, cleaning, storage and site rhythm all matter. The documented 3, 10+ and 30 cycles are reference positions for each route; record the target finish, site practice and acceptance evidence in the technical approval.

09 · 经济型拼接式建筑模板 / Economy Jointed Formwork

经济型木建筑模板，板芯实木拼接，表面覆膜或印刷。标准尺寸 1220×2440 mm、厚约 17 mm、单张约 29.5 kg，资料定位为可周转约 3 次的一次性使用板，主要面向中东、非洲等价格敏感市场。

An economy wood formwork panel with a jointed solid-wood core and a film-faced or printed surface. Documented at 1220 × 2440 mm, about 17 mm thick and about 29.5 kg per sheet, positioned for roughly three reuses or single-use, mainly in price-sensitive Middle East and African markets.

规格与销售政策 / Specification & Policy

资料卖点 / Documented Points

1. 成本导向，预算友好，适合低价工程与转售。Cost-oriented and budget-friendly for low-price projects and resale.
2. 一次性使用，省去拆模回收与返运成本，远距离市场综合成本更低。Single-use positioning avoids stripping-recovery and return freight, lowering total cost in distant markets.
3. 表面品牌印刷可定制，3 柜起做客户自有品牌。Custom brand printing from three containers.
4. 整柜标准化出货，1 柜起订，物流成本可预期。Standardised container loading from one container, making freight more predictable.

适用市场 / Target Market

约 3 次周转是按一次性使用定位给出的参考值；要求多次周转或清水饰面的项目应改用中档或高档路线。印刷样式与品牌授权须在下单时一并确认。The roughly three-reuse figure assumes single-use positioning; projects needing repeated cycles or fair-faced finishes should use the medium or premium route. Print artwork and brand authorisation must be confirmed with the order.

以下为 06 源档案图片，图中品牌及工程效果仅作资料示例，不代表汇俱自有工厂或已交付项目；以实物样板确认。Source-document references, not claims of Huiju-owned factories or completed projects. Confirm against physical samples.

10 · 中档全桉木覆膜模板 / Medium All-Eucalyptus Film-Faced

板芯 100% 全桉木，三聚氰胺脲醛胶（MUF）胶合，耐水 WBP 级，资料称水煮 8 小时不开胶。按高层建筑约 5 天/层施工，资料口径可周转 10 次以上。表面分红板（酚醛树脂面，易脱模）与覆膜板（覆面纸，脱模更好、更耐用）。

A 100% all-eucalyptus core bonded with melamine-urea-formaldehyde (MUF) adhesive at WBP water-resistance, documented to survive 8 h boiling. At a high-rise rhythm of about five days per floor, the document states over ten reuses. Surfaces are red board (phenolic resin face, easy release) and film-faced board (facing paper for better release and durability).

4×8（1220×2440 mm）分厚度规格 / 4×8 Sizes

金额列已移除；红板 / A 级覆膜 / B 级覆膜三种表面在同一厚度下均可选。16.0 mm 与 16.5 mm 的单张重量在资料中未严格递增，按原文保留。

3×6（915×1830 mm）红板分厚度与层数 / 3×6 Red Board

同一 15.0 mm 厚度在资料中有 9 层与 10 层两种结构，重量与装柜张数不同；下单须写明层数。 / The source lists both 9-ply and 10-ply structures at 15.0 mm with different weight and loading figures; state the ply count on the order.

3×6（915×1830 mm）覆膜板（小黑） / 3×6 Film-Faced

现货、包装与起订 / Stock, Packing & MOQ

• 现货规格（资料口径）：3×6×15 mm、4×8×15 mm、4×8×18 mm；现货留打包时间约 3 天，须与采购确认。Documented stock: 3×6×15 mm, 4×8×15 mm and 4×8×18 mm; about three days for packing before despatch, to be confirmed with purchasing.
• 包装：每包张数以 5 或 0 结尾（如 50 / 55 张）；包高不超过 95 cm，每包重量不超过 1.8 吨。Bundles end in 5 or 0; height under 95 cm and weight under 1.8 t.
• 覆膜纸图案定制：3 个柜起订。Custom facing-paper artwork from three containers.
• MOQ：一个规格以一托为起订量。One pallet per size.

资料卖点与市场 / Points & Market

1. 全桉木芯材，强度与平整度优于拼接板。All-eucalyptus core with better strength and flatness than jointed board.
2. MUF 胶 WBP 级，资料称工地淋水日晒不开胶；长期暴露仍须边封与维护。MUF adhesive at WBP grade, documented as surviving site wetting and sun; long exposure still needs edge sealing and care.
3. 资料口径周转 10 次以上，单次使用成本更低。Documented 10+ reuses, lowering cost per cycle.
4. 红板/覆膜、3×6/4×8 多规格匹配不同预算。Red/film surfaces and 3×6/4×8 formats to match different budgets.

以下为 06 源档案图片，图中品牌及工程效果仅作资料示例，不代表汇俱自有工厂或已交付项目；以实物样板确认。Source-document references, not claims of Huiju-owned factories or completed projects. Confirm against physical samples.

11 · 高档酚醛胶清水模板与舞台防滑板 / Premium Phenolic Fair-Faced & Stage Board

本档为高端产品线，板芯 100% 全桉木、一级烘干料，采用酚醛树脂胶（PF），表面平整度与原材料精度显著高于中档，资料定位出口欧盟、美国、澳洲等对质量与认证要求高的市场，并自述已通过 CE 认证。分一次成型与二次成型（两次热压、全连心）两种工艺。认证与出口准入须按型号、生产主体与有效文件核验。

This premium route uses a 100% all-eucalyptus, grade-1 kiln-dried core with phenolic (PF) resin and documents significantly better flatness and material precision than the medium route, positioned for the EU, US and Australia and self-described as CE certified. Both single-pressing and double-pressing (fully continuous core) routes exist. Certification and market access must be verified by model, producer and valid documents.

酚醛胶（PF）资料特性对比脲醛胶（UF） / Documented PF vs UF

清水覆膜板 · 2440×1220 mm（密度 650 kg/m³） / Fair-Faced Film Panel

金额列已移除；一次成型与二次成型为同一规格下的两种工艺选项。

二次成型经两次热压、全连心结构，资料称板面更平整、公差更小。Double pressing uses two press cycles and a fully continuous core, documented as flatter with tighter tolerance.

二次成型清水模板资料卖点 / Double-Pressed Points

1. 拆模即清水墙：资料称板面平整光滑，浇筑后混凝土表面细腻，可减少抹灰找平；最终饰面取决于模板体系与浇筑。Documented as producing a fine concrete surface that can reduce rendering; the final finish depends on the formwork system and placing.
2. 公差与一致性：资料称厚度一致、重量均一，并提到两柜同规格板材总重差不超过 30 kg 的一致性目标；按批次实测记录，不将目标值当作保证。Documented thickness consistency and a stated target that two containers of the same size differ by no more than 30 kg in total weight; record actual batch measurements rather than treating the target as a guarantee.
3. 高端工程适用：核电站、艺术馆、美术馆、桥梁、高层建筑等对混凝土外观有高要求的项目。High-end projects such as nuclear plants, galleries, museums, bridges and high-rises with demanding concrete appearance.
4. 出口定位：资料自述 CE 认证、面向欧美澳；须以对应型号的有效文件核验后再用于准入申报。Self-described CE certification for the EU, US and Australia; verify with valid documents for the model before relying on it for market access.

舞台防滑板 · 1250×2500 mm / Anti-Slip Stage Board

全桉木一级烘干料、层层机拼；太尔 130 g 膜纸（浸胶后）、酚醛胶。单面防滑板另贴单面杨木、采用 ≥185 g 太尔膜纸。可升级 185 g 双面膜纸。

All-eucalyptus grade-1 kiln-dried core, machine-laid ply by ply; 130 g Taier facing paper after impregnation with phenolic adhesive. The single-sided anti-slip version adds a poplar face and uses ≥185 g Taier paper. A 185 g double-sided upgrade is available.

起订与定制：资料记录一个规格 300 张起订，覆膜纸表面图案定制 3 个柜起。舞台与活动地面项目还须核对承载、支撑龙骨、接缝与防滑等级要求，防滑效果应绑定具体表面测试。MOQ & customisation: the source records a 300-sheet minimum per size and custom facing-paper artwork from three containers. Stage and event-floor projects also need load, sub-frame, joint and slip-resistance requirements; the anti-slip claim must be tied to a specific surface test.

目标市场与客户 / Target Market

资料中的清水混凝土工程图片为效果示意，用于说明二次成型模板可实现的饰面方向，不代表某个已完成项目或汇俱自有工程业绩。 / The fair-faced concrete images in the source are illustrative of the finish direction achievable with the double-pressed route; they do not represent a completed project or Huiju's own reference list.

以下为 06 源档案图片，图中品牌及工程效果仅作资料示例，不代表汇俱自有工厂或已交付项目；以实物样板确认。Source-document references, not claims of Huiju-owned factories or completed projects. Confirm against physical samples.

12 · 选型路径 / Selection Path

先定用途与表面做法，再定芯材、胶合与规格。同一厚度下不同档位不是可互换的报价项。

Fix the use and surface method first, then core, bond and size. Different grades at the same thickness are not interchangeable quotes.

承重结构、长期户外、永久浸水或特殊工程用途不能由本页规格直接批准，须按项目规范、结构计算与适用标准另行确认。Load-bearing structures, permanent exterior exposure, permanent immersion and special-project uses cannot be approved from this page alone; they require project specification, structural calculation and the applicable standard.

13 · 应用场景与边界 / Applications & Boundaries

14 · 质量控制与文件核验 / QC & Evidence

来源资料中的“水煮 3 小时/8 小时不开胶”“CE 认证”“抗变形”“两柜总重差 ≤30 kg”等表述未附报告编号，本页按资料口径引用。FSC 证明的是经认证的供应链范围，CARB P2/TSCA Title VI 关注复合木制品甲醛要求，二者不是同一类文件；询证时须锁定生产主体、基材、饰面后成品、厚度与销售市场。Source statements such as 3 h/8 h boiling, CE certification, anti-warp behaviour and the ≤30 kg two-container weight difference are quoted as source wording without report numbers. FSC covers certified chain of custody while CARB P2/TSCA Title VI addresses formaldehyde in composite wood; they are different documents. Pin down producer, substrate, finished construction, thickness and market when requesting evidence.

15 · 包装与装运核算 / Packing & Loading Planning

各产品线的 kg/张、装柜张数与每包张数已列在对应规格表中。本节给出通用的包装规则与一个装运核算算例；装柜张数为资料参考，未含托盘与包装重量，实际须按柜型、路线与限重复核。

Per-product kg/sheet, container counts and bundle counts appear in their own specification tables. This section gives the common packing rules and one worked loading example; the documented container counts exclude pallet and packing weight and must be rechecked against container type, route and weight limits.

算例：以 4×8 家具板 18 厘（32.3 kg/张，资料记录整柜 877 张）为例，净重约 877 × 32.3 ≈ 28,327 kg，即约 28.3 吨，已接近或超过常见 28 吨净重口径；再加托盘、包装与加固后总重更高。因此资料中的整柜张数应按“约 28 吨净重”推算理解，正式装柜须按实际柜型限重、毛重与航线要求扣减。

Example: for 4×8 furniture board at 18 li (32.3 kg/sheet, documented 877 sheets per container), net weight is about 877 × 32.3 ≈ 28,327 kg, or roughly 28.3 t — already at or above a common 28 t net basis. Adding pallets, packing and dunnage raises gross weight further. The documented container counts should therefore be read as derived from an approximately 28 t net basis; final loading must be reduced to the actual container weight limit, gross weight and route.

中档模板 18.0 mm（31.0 kg × 913 张 ≈ 28.3 吨）与高档清水板 18 mm（34.8 kg × 813 张 ≈ 28.3 吨）呈现同一数量级，可作为同一推算口径的交叉印证。 / Medium formwork at 18.0 mm (31.0 kg × 913 ≈ 28.3 t) and premium fair-faced 18 mm (34.8 kg × 813 ≈ 28.3 t) are the same order of magnitude, cross-checking this basis.

16 · 一次问清的询盘清单 / Complete Inquiry Checklist

历史起订与交期参考 / Historical MOQ & Lead Time

上述为资料中的历史业务口径，当前订单须分别确认每色 MOQ、生产完成日与出运日。These are historical business references in the source; confirm current MOQ, production completion and shipment dates per order.

17 · 图册与色卡 / Catalogues & Colour Cards

胶合板与三聚氰胺饰面的图册统一从永久阅读页进入；色卡按色号订货，来图来样可询价打样。

Plywood and melamine catalogues are reached through the permanent reader pages; colour cards are ordered by code, and custom matching can be quoted from a supplied sample.

• 胶合板产品图册 / Plywood catalogue
• 三聚氰胺胶合板图册 / Melamine plywood catalogue
• CIKIR CGART 饰面色卡 / CIKIR CGART surface album
• 全部图册与色卡 / All catalogues and colour cards

三聚氰胺五大高端子系列（空间法则、仿生木皮、万花筒、轻混、繁花）及各系列色号，可在上述图册阅读页与全部图册入口中按名称查找。图册与色卡来自资料自述的生产与供货体系，用于花色筛选；实际可供货色号、批次色差与产地须按订单确认。 / The five premium melamine sub-series and their colour codes can be found by name in the reader pages and the catalogue index. Albums support decor selection; actual supply, batch shade variation and origin are confirmed per order.